Skip to main content

Mon - Sat: 10:00am - 6:00pm | Sun: Closed

(406) 830-3195

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Model Years
  • Show Fewer Model Years

Seatposts

$121.95
Thomson's Elite Setback Seatpost is perhaps one of the most recognizable bicycle components in the world and it has earned its reputation as a super-strong, light and reliable beauty. With roots in the aerospace industry, Thomson builds the post with a tough and light 7000-series aluminum body, an elliptical extrusion that adds strength and stiffness, and a head and seat clamp forged and machined from a block of aluminum to eliminate any possible weak areas. Plus, its simple-to-use 2-bolt seat clamp allows speedy, infinite and secure seat angle adjustment from minus 5 degrees to plus 29 degrees. Upgrade your favorite ride to a Thomson seatpost and start riding in style.
$89.99
- 3D forged from 2014 heat-treated aluminum for optimal strength to weight ratio - Race Face's triple butting design maintains strength in critical areas while reducing overall weight - The tube is anodized & shot peened for increased fatigue life - Updated Hunter head design for easy saddle installation and full adjustability - 3D forged from 2014 heat treated aluminum with triple butted mast - Thumbscrew tightening system allows quick dial-in of the saddle angle by hand - Angled clamp bolts allow easy tool access for hassle free adjustment - Rubber grommet seals the post to prevent water from entering seat tube - Accepts 7/8mm CrMo/alloy and 7/9mm carbon rails. 260g (30.9mm)
$149.99
- Highly tested & engineered unidirectional carbon tube offers outstanding fatigue & impact strength for a lightweight XC post - Simple, lightweight 2 bolt design permits the saddle to be installed without disassembling the head - Angled clamp bolts allow easy tool access for hassle free adjustment and tightening - The rubber seatpost grommet fully seals the post to prevent water entering your seat tube - Hunter head is suitable for most rail types 7/8mm alloy rails and 7/9mm carbon - Wide lower cradle gives extra rail support for lightweight saddle rails - Narrow upper cradle increases the amount of forward/back saddle adjustment - Tilt Adjustment 6° up 12° down with Zero offset
$96.00
The new SL-K SBS SB0 seatpost is lighter and stiffer than ever. Using a UD carbon shaft with a bonded alloy head and a sophisticated SBS clamp design, we can achieve what we believe is the finest SL-K seatpost yet. Available with a polymer Di2 battery holder. - UD carbon shaft with bonded alloy head - Forged alloy "SBS" 2-bolt head - Chromoly hardware - 20mm setback - Fits 7mm standard rails and 7x9mm oval rails - 221 grams
$479.95
Thomson Covert Elite Dropper Seatpost-31.6 150mm Black Internal. We've set the bar with the Thomson covert black dropper post. It's designed around internal routing for clean installation and an updated shift style remote lever for effortless operation. The Thomson Covert Dropper includes a new shifter oriented remote lever for easy operation. The cartridge-based system is designed to have the longest service life in the industry. If repair is needed, it's fast, affordable, and simple. Every part that makes up the Covert dropper is carefully chosen, and of the highest grade quality available. - Custom made Norglide bearing bushings and Trelleborg O-Rings and seals - Thomson saddle clamps and fasteners - Motul Oil for durability and precision quality. - The return speed is damped in the last 15mm of upward travel to be gentle on your seating area. - 60mm (Ø27.2 only), 100mm, 125mm, 150mm of infinite travel. - Passes ISO 4210 fatigue and strength tests for seat posts.
$325.00
ENVE has found that a dropper seatpost can enhance the gravel experience and that 40mm of drop is just the right amount for most gravel riding and racing. A dropper post allows the rider to lower their center of gravity on descents which can result in greater control and therefore confidence. While designed primarily for gravel riders, the G Series Dropper allows XC riders and racers a lightweight dropper with just the right amount of drop. - 395 grams (can be trimmed for an additional 40 grams in weight savings) - Mechanical actuation - Internal Routing Only - 40mm of drop/travel - 350mm length (Min Post Height: 140mm seat post clamps saddle rail - 27.2mm diameter post (Includes shims for 30.9mm and 31.6mm posts) - Fully serviceable, no special tools required - Compatible with all cable actuated remote levers
$299.00
The all-new Highline delivers infinite adjustment, smooth feel, and easy installation for any bike. Details - Shorter insertion length to fit more bikes - Premium Trelleborg sealing - Exclusive Igus LL-glide bearings and keys - Jagwire cable and housing - Self-contained IFP hydraulic cartridge - Internal routing - Quick connect mechanism for ease of cable installation - Linear actuator for quick return speed - 2-bolt quick-connect head - Remote sold separately
$159.99 - $233.00
The OneUp Dropper post is available in 120mm, 150mm, 180mm and 210mm lengths and all can be shimmed down in travel by 10 or 20mm. We've been obsessed with shaving every last millimeter from the latest OneUp post to give you the the shortest stack height and shortest total length of any dropper post. No other post can get your saddle lower. Starting from $199 USD with free shipping worldwide, cable actuated with reliable sealed cartridge internals for easy home servicing and includes travel adjust shims allow you to custom tune your post to dial in your perfect length. The dropper market is dominated by expensive big brand posts and generic catalog shopped posts with different logos. We want to offer something better, a post with class leading specs, innovative useful features AND real value. Want more from your dropper? Get OneUp. FEATURES - Travel adjust shims allow you to custom tune your post to dial in your perfect length. - Cable actuated for easy installation and a simple no bleed remote - Ergonomic remote paddle position - Reliable sealed cartridge internals - User replaceable cartridge only $60 USD - Easy to service at home - 2 year warranty UPDATES - Shortest total length of any dropper - Shortest stack height of any dropper - New upper DU Bushing in the upper collar - Increased bushing overlap and durability - 100-210mm post lengths in 10mm increments. - 20g lighter SPECS - Drop 120mm, 150mm, 180mm, 210mm adjustable*. - Diameter 30.9, 31.6, 34.9 - Routing Internal only Remote Compatibility: - SRAM Matchmaker X - SRAM MMX clamps - Shimano I-spec-EV - 12 speed XTR M9100, XT M8100 and SLX M7100 - Shimano I-spec II - 11 speed XTR M9000, XT M8000, SLX M8000 only - 22.2mm Bar Clamp - All other groups 10 speed SHIMANO - Cable clamping remote only (post requires cable stop to be assembled at base of post) - Travel Reducing Shim Reduces travel by up to 20mm. Weight Post Only - (30.9) 120mm 435g / 150mm 480g / 180mm 525g / 210mm 570g - (31.6) 120mm 450g / 150mm 500g / 180mm 545g / 210mm 590g - (34.9) 120mm 545g / 150mm 605g / 180mm 660g / 210mm 710g Remote Only - Remote with 22.2mm Bar Clamp - 46g - Remote with SRAM Matchmaker X / I-spec-EV - 43g - Remote with Shimano I-spec-EV - 43g - Remote with Shimano I-spec II - 41g - Housing and Cable (1300mm installed length) - 50g
$269.99
- Longer Drop – The Tellis is now available in 200mm drop so riders can benefit from the ability to further drop their saddle. This allows for more free movement on the bike when the trails get steep, fast or technical - The same proven & trusted design, now in a longer 200mm drop length - Internal Routed, Infinitely Adjustable Design - Simplistic—Fully Sealed Alloy Cage / Stainless Tip Cartridge System - Durable 3D Forged Head—With 7075-T6 Forged Clamp - Intelligent Keyway System—Ensures Minimal Play - Easiest Installation—Cable Head Attaches At Base - Cold Weather Approved—Tested Down To -20C - Featherlight Lever Thumb Actuation—Industry Leading - 282mm insertion length - 1x Lever included—With Premium Jagwire Lex Slick Housing, Stainless Cable and Hardware
$104.00
- 3D forged one piece shaft and clamp base with robust cradle and top clamp - Length: 400mm - Turned CNC finish with a degree of texture for a positive clamp grip - Tough 6mm hardware, 0.5" clamp offset - 280g (27.2mm)
$28.00
Dimension Two-Bolt Seatposts provide a sturdy and durable saddle perch for cross country and all-mountain riding in three diameters, rigorously tested to ISO 4210 Mountain standards. - Constructed with AL-6061-T6 aluminum - Shot-peened finish - 0mm offset
$179.00 - $190.00
In the bike industry, fashion is determined by the mud on your shorts and dust on your shoes. Yet, there is something undeniably satisfying about a freshly tailored suit, so we designed the all new Rainier Dropper Post to add that custom-tailored feel to your bike. The past version of this post is known for its consistency and reliability. While maintaining those qualities, this new iteration focuses on fitting more bikes and providing refined adjustability for the rider. - Tool-less Travel Adjust - Shortened Overall Length - Sealed air cartridge - Internal cable routing - 3-year warranty!
$199.00
Such Great Heights The budget-friendly Aeffect R Dropper Post is a rock-solid, shred-ready entry into the dropper post world. Designed right to keep you on the trails and out of the shop as much as possible, you'll wonder how you ever rode without one. It's What's Inside That Counts The brains of this dropper post are an extremely reliable cable-actuated hydraulic cartridge that delivers infinite adjustment within its travel. Simple Saddle Setup A user-friendly zero-offset seatpost clamp really cuts down on the time between setting up your saddle and ripping down the trail.
$275.00
ENVE's proven twin-bolt seatpost design refined for the modern road bike with seatpost battery integration capabilities. - Material: Carbon Fiber - Hardware Material: Titanium - Saddle Angle Adjustment: 0 – 27 degrees - Saddle Rail Compatibility: 7x10mm Carbon Rails / 7mm Round Alloy Rails - Torque Spec, Saddle Rail Clamp Bolts: 5.5Nm - Torque Spec, Seatpost Collar: Determined by your Frame manufacturer/Seatpost Collar - Weight: 210g (25.4mm), 204g (27.2mm), 204g (30.9mm), 204g (31.6mm)
$200.00
The X-Fusion Manic post uses internal cable routing and was designed around a low-profile seat cradle and seal collar to fit a broad range of frames. The mechanism is air-sprung and hydraulically locked. The remote can be run on the left or right, above or below the handlebar, but is optimized as a left shifter replacement for 1x drivetrains. - Cable activated, hydraulic action, infinitely adjustable travel - Double key-way design prevents lateral twisting - Double bolt clamp with a wide range of seat angle adjustment. Fits both standard and 7 x 9 mm Carbon Rails - Sealed cartridge internals for quick replacement - Low profile head-seal and saddle clamp increase useable travel
$31.99 - $32.00
Dimension Alloy seatpost. - 1-piece forged AL-2014 - Clamp Style: Standard Rails - Material: Aluminum - Max Height: 245mm - Min Height: 35mm - Weight: 250g
$180.00
The Cascade dropper post pays homage to the Cascade mountain range, home to some of the best riding in the PNW. This post is a workhorse: it’s super reliable, loved by our customers, and now features multiple travel options. The Cascade provides dependable up and down service for the miles to come, and maintenance on the Cascade is easy (like all our droppers). Plus, external routing at the mid-cap ensures your cables are kept nice and tidy during up and down actuation. You can find sweet upgrades to the Cascade’s OG dropper design on the posts featuring 150/170mm of travel. These models have larger diameter stanchions, making them stiffer and lighter… which is sweet because who wants a bike part that’s heavy and too compliant? These longer travel models also come with an added DU bushing to combat seat wobble, because let's face it… the only thing that should be wobbly on your bike are your legs after a long ride. Levers: - Choose from our Loam Lever, Puget 1x or 2x drivetrain compatible levers, or Roadie/Drop Bar Lever Kit for road bars - 1x Lever - Designed to be used with bikes using a single front chainring, this is a "shifter style" lever - 2x lever - Designed to play nice with front shifters, this is a "vertical" lever that accommodates for the shifter on the left side of your handlebar Product Specs: - Choose any lever kit - 30.9 & 31.6mm Diameters - Weights: 125mm - 608g, 150mm - 613g, 170mm - 674g - 2-bolt Micro Adjust Head - Fixed External Routing at the Mid Cap for clean cable routing - 3-year warranty!
$359.00
The proven Transfer seatpost gets lighter and tighter. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth. "Factory" says it all. The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth, ultra-durable Genuine Kashima Coat. These products are World Cup proven. The Transfer continues the excellent reputation of smooth function and great reliability with an infinitely adjustable height design, and internal or external cable routing options. Low lever force and great modulation make it easy to regulate return speed and small height adjustments. The Factory Series Transfer features Genuine Kashima Coating for maximum performance. - Cable actuated with tool-free quick disconnect for easier installation and removal - Low lever force provides consistent actuation pressure even with saddle weighted or unweighted - Easy to modulate return speed with lever - Factory Series models feature Genuine Kashima Coat - Remote lever sold separately
$349.95 - $379.95
The Wolf Tooth Resolve Dropper Post is the first dropper post to use a self-bleeding cartridge. It has the shortest stack height of any dropper post on the market, has a short insertion depth, is one of the lightest dropper posts, and is completely serviceable at home. - Self-Bleeding Resolve Cartridge: At the heart of Resolve Dropper Post is a self-bleeding cartridge that removes air from the fluid chamber with every actuation. All dropper posts can get air in the chamber, which leads to sag and squish. Resolve Dropper Post is the only dropper post that purges air from the chamber, which means you'll never need to buy a new cartridge as you do with all other dropper posts. - Shortest Stack Height: The shortest stack height of any dropper post means that Resolve can get your saddle lower than any other dropper post. The lower your saddle, the more room you have to maneuver your bike on drops and techy descents. - Weight and weight per travel is equal to the best: Resolve Dropper Post is one of the most lightweight dropper posts on the market when it comes to grams per millimeter of travel. It's as much as 26% lighter than other dropper posts of the same travel size. - Short Insertion Length: When a dropper post has a short insertion length, longer travel options are unlocked for more bikes. A short insertion length is vital for smaller bikes, frames with curved seat tubes, and frames with seat tubes that have bottle bosses. - Travel Reduction with Spacers: The travel length of your Resolve dropper post can be customized in order to suit your bike and saddle height. Spacer kits are sold separately or those who would like to have the adjustment made later by their local shop mechanic. If you are comfortable with working on suspension components, you may be able to complete the installation yourself.
$350.00 - $410.00
3 years of REVIVE out in the market resulted in another benchmark product for BikeYoke: REVIVE 2.0. The new extralong 213mm REVIVE required a lot of re-thinking and re-engineering the whole chassis structure and since we think they deserve it, the shorter REVIVES will also get all the nice updates, and benefit from what was originally implemented only for the longest sibling of the REVIVE family. Noteworthy updates of the REVIVE 2.0 include: - One piece 3D-forged upper tube unit for improved stiffness and strength - Fully hard-anodized pin seats in the upper tube for improved corrosion-resistance - CNC-finished actuation lever for even smoother engagement - New upper saddle clamp and saddle bolts with integrated conical washers for even simpler saddle installation Wanna know more about the REVIVE? What if there was a dropper post, that actually solves and not just improves reliability issues, saves cost and time on the long run, and does not let you worry about too much time spent at service-centers? Or how about “bleeding” your seat post within a few seconds, while it is still installed in your bike? BikeYoke presents the REVIVE dropper post, featuring one of the most brilliant design features in dropper post design in many years. More than 10 years of experience in drop-post design went into the “REVIVE” and the development has finally paid off. Of, course, just as many other companies, BikeYoke would say, that REVIVE is reliable and strong and smooth. And yes, REVIVE is all of that, but not because we tried to improve current designs, but because we were thinking outside of the box and created a new concept, that is completely different from everything before. To understand the benefits over other posts you have to know about the problems of many current designs first. Many of the popular current seatpost designs are based on a hydraulic lockout-system that relies on a perfectly sealing IFP (Internal Floating Piston), separating oil from air to prevent the seatpost from getting sagging or bouncing. There are a lot of difficulties to overcome when using an IFP because an IFP has to maintain 100% sealing function. If air could go to the oil side, your post will start becoming springy. This happens to a lot of posts in the market already and is the main issue why posts need to be serviced. That´s why BikeYoke´s “REVIVE” features a NON-IFP design, because we think it is too difficult - if not impossible - to make a really reliable design using an IFP. REVIVE only requires 2 dynamic seals in the hydraulic circuit: The shaft sealing and the main piston sealing for the lockout mechanism. The highly critical IFP has been removed, and with it the need of perfect concentricity and finish of the sealing surfaces of the tubes. The lack of an IFP also results in the smoothest action you can think of. The most important and ground-breaking feature of Revive is its “REVIVE-VALVE”. Even REVIVE can get air somewhere where it does not belong. This can happen for example when you actuate your seatpost while its upside down. And here is where the patented RESET VALVE comes into play: - Insert a 4mm Hex Key into the REVIVE hex port, turn it and push down the post by hand. - This will reset your hydraulic circuit on the fly - whenever. wherever. This is done just within a few seconds and only by the turn of a 4mm Allen key or the integreated mini reset lever, that comes with the post - of course without even having to remove your drop post from your bike. So, now one might already understand that: - No external air will want go inside the post´s hydraulic circuit, since it is charged with higher pressure, than its surroundings. - No oil will go out (or at least very very little oil over the curse of a long time), because of very stable sealing - external sealing has never been a real problem of current post design - The hydraulic system can be reset to “new” via the unique “REVIVE-valving” - This means the hydraulic circuit is a very stable closed system and basically maintenance free. Still there are parts that will need to be serviced sooner or later and when designing REVIVE it was put a lot of attention to maximum user-friendly serviceability: - Bushings and keyway pins will wear over time. Usually, the pins wear first and you would want to replace them to reset your rotational play. - Exchanging the pins and the lower bushing is simple and does not require any opening of the hydraulic system and can be done within less than 5 minutes. 1 set REVIVE dropper post includes: - 1x REVIVE Seatpost - 1x cable housing 1500mm - 1x inner wire 1700mm - 2x housing endcap - 1x barrel cable clamp - 1x air valve adapter - 1x Quick-Reset-Lever - 1x remote (optional) - 1x BikeYoke I-spec adapter or Splits Clamp (optional) - 1 set titanium saddle bolts and nuts (optional)
$299.95
The Ritchey two-bolt post reinvented—lighter, more compliant, and more versatile than ever. Patented LINK clamp works with all standard saddle rail designs as well as Ritchey Vector Evo and Selle Italia MonoLink saddles with separate adapter. LINK Carbon Posts use FlexLogic carbon layup developed for Pro Tour team bikes from Stevens, Canyon, and Scott — 15% more vertically compliant with no loss of lateral or torsional stiffness. 15mm offset with reversible clamp. - Material: lightweight carbon fiber - Saddle clamp: standard rails - Saddle clamp torque: 15Nm (max) - Seat collar torque: 6Nm (max) / 7Nm (max) for Ritchey steel frames - Weight: 145g (27.2x350mm) - Color: matte UD carbon finish
$249.99
- Internal Routed, Infinitely Adjustable Design - Simplistic - Fully Sealed Alloy Cage / Stainless Tip Cartridge System - Durable 3D Forged Head - With 7075-T6 Forged Clamp - Featherlight Thumb Actuation - Industry Leading - Intelligent Keyway System - Ensures Minimal Play - Easiest Installation - Cable Head Attaches At Base - Cold Weather Approved - Tested Down To -20C. - 1x Lever included - With Premium Jagwire Lex Slick Housing, Stainless Cable and Hardware - Remote Position: On handlebar - Cable Routing: Internal - Offset: 0mm - Clamp Type: Standard, double bolt - Seat Post Material: Aluminum - Seat Post Weight: 510g
$172.00
The carbon Service Course SL seatpost is specifically tuned to be more shock absorbing than the "comfort" seatposts on the market, while still passing our strict internal MTB strength test. Flex engineered into the lightweight carbon tube keeps the rider comfortable over any terrain. Better fit means better performance, and if your saddle is out of position, you'll waste energy with every pedal stroke. The secure, two-bolt clamp makes for easy micro-adjustments of saddle position, and the head has been redesigned for maximum bolt-head accessibility. The Service Course SL seatpost makes it possible for nearly any rider to achieve the perfect fit, and the clamp works with all saddle rail types. - Distinctive Zipp cosmetics - Unidirectional Carbon fiber tuned for ride comfort - Lightweight clamping system - Lifetime warranty
$479.95
Keep the flow going with Thomson's Elite Covert Dropper Seatpost, a post good enough to wear the Thomson badge. This exquisite bicycle upgrade is made of tough and light 7000 series aluminum and its cable attaches to the very bottom and uses your bike's internal cable routing to keep your frame nice and clean. Of course, the Elite features Thomson's trademark engineering and reliability with custom, best-of-the-best O-rings, bushings, and oil. Thomson's remote handlebar lever is included. It's one of the smallest, most-ergonomic ones available and it has a short throw for quick height changes to move your saddle smoothly through 5 inches of infinite travel (damped in the last 15mm for a forgiving action). Plus, the classic Thomson seat clamp allows quick and easy seat adjustments and keeps your saddle in place.
$155.12
NCX Suspension Seatpost - Alloy construction - Coil spring with preload adjuster - Brass pivot bushings
$229.99
The minimal design of the ShockStop Seatpost blends seamlessly with the aesthetic of modern gravel, road, and e-bikes. Along with the ShockStop Stem, this system works together to reduce fatigue and strain, letting you ride further, faster, and more comfortably. Benefits: - Go further—reducing fatigue from bumps and vibrations - Ride faster—energy that is normally wasted suspending your body is converted into forward motion - Take control—customize your suspension feel to float over obstacles and maintain control Details: - 35mm of active suspension travel - Infinitely adjustable stiffness via pre-load adjustment and swappable springs - Adjusting stiffness / pre-load does not reduce travel - Swappable springs included to accommodate varied rider weight and preference - Optimized linkage geometry provides ultra-responsive suspension feel - Check technical specifications for compatibility What's in the Box: - 1 x ShockStop Seatpost - 2 x springs (1 pre-installed, 1 included in box for increased stiffness) - All required hardware
$199.99
The patented Dual-Position Seatpost lets you ride a true aero position on a standard road bike, without sacrificing your normal road position. Along with the Quick-Release Aerobars it provides the benefits of a triathlon or time trial bike without the additional bike or price tag. The key to riding powerfully and comfortably is proper saddle position and since you can switch between road and aero positions on-the-fly while riding, you can always choose the best riding position for every part of your ride. Benefits: - Transform your current bike—switch from road to aero position on the bike you already own - Ride with ease—no more time and energy wasted switching from road bike to aero bike Details: - Linkage design lets you switch between road and aero positions seamlessly while riding - Choose the best position for every single climb, flat, or descent - Maintain proper leg extension in both road and aero positions - Saddle moves forward 50mm, corresponding to approximately 4 degrees of effective seat tube angle change - Aero road riding position optimized for proper handling on a road bike - Simple, durable two-bolt saddle clamp allows infinite saddle tilt adjustment and reliable clamping - 16mm rearward setback (road position) - Check technical specifications for compatibility
$96.00
The new SL-K SBS SB0 seatpost is lighter and stiffer than ever. Using a UD carbon shaft with a bonded alloy head and a sophisticated SBS clamp design, we can achieve what we believe is the finest SL-K seatpost yet. Available with a polymer Di2 battery holder. - UD carbon shaft with bonded alloy head - Forged alloy "SBS" 2-bolt head - Chromoly hardware - 20mm setback - Fits 7mm standard rails and 7x9mm oval rails - 221 grams
$219.99
Performance suspension seatposts designed to add comfort and compliance to any bike without adding unnecessary weight. With 35mm of travel, the eeSilk+ is a suspension seatpost designed to noticeably soften any gravel or mixed-surface road. These posts make great enhancements to gravel or mixed surface bikes by reducing the chatter transmitted from the surface to the rider and can be tuned to rider weight through a simple elastomer change. #5 elastomer comes pre-installed, other weight elastomers sold separately - Travel: 35mm - Length: 387mm - Weight: 373g (27.2mm); 378g (31.6mm) - Max Rider Weight: 250lbs - Offset: 12mm - Minimum Extension: 80mm - Maximum Extension: 287mm
$205.00 - $211.00
We designed the Tall & Handsome with strength and elegance in mind, but also to be super easy to setup and adjust. Like all PAUL components, it’s built to the highest standards for tolerance, function, reliability, and ease of use. Machined by us here in sunny Chico, California. - Nice looking seatpost is built to the highest standards for function and ease of use - Head and shaft are made from a special high strength 2024 aluminum alloy - Two bolt head offers roughly 15 degrees of tilt adjustment - 26mm clamp setback. 320g - Made in the USA