Tubes, Pumps, and Car Racks

- Low Lead Valve - ISO Diameter: 457 - ISO Width (mm): 44mm - Labeled Size: 22 x 1.75 - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 145g

The least expensive way to ditch 40+ grams of rotating weight is with our Turbo Talc Tubes. A patented, oversized 4.8cm valve base prevents tearing, while a partially threaded valve stem provides a clean interface with pumps. Our lightest and most supple tube offering, it's also been proven in rolling-resistance testing to reduce drag by as much as 13% per wheel. - Packed in talc for easier installation. - 4.8cm valve base prevents issues of valves tearing off. - Smooth at the top for easier pump head insertion and reduced wear on pump internals. - Thinner tube design saves approximately 40 grams of rotating weight. - Thickness: 0.6mm

- The original tube for flat protection - Non-toxic and environmentally safe - Protects against punctures up to 1/8-inch

- Mid-volume steel barrel and piston with composite matrix base - Precision 3.5-inch gauge (100 psi / 6.89 bar) - Extra long, high-strength hose - Varnished wood handle - ABS1 Pro with Presta/Schrader valve chuck

The BackStage is the only swing away platform hitch rack on the market that swings out 180 degrees. No matter if you have a truck, SUV or camper van, this rack is perfect for those who need open access to the back end of their vehicle. Based around the MonoRail platform, the BackStage provides full access to the back of the vehicle, even with bikes loaded. - The industry’s first 180 degree swing away platform hitch rack - Carries 2 bikes, up to 60 lbs per tray (120 lbs total). Not compatible with Add-On - No contact with frame, secures bicycle by front wheel - Carries road tires up to 5.0” fat bike tires, and diameters from 20” to 29” - Compatible with bicycle wheelbases from 36” to 50” - Folds flat against the vehicle and tilts down 30 degrees to allow for hatch access - Only available for 2" hitches. Utilizes RockyMounts premium 3-axis anti wobble system - Includes locking hitch bolt and cable lock, keyed alike - Not for use with fender equipped bicycles - Rack weight 59 lbs (shipping weight 75 lbs) - For cargo vans like Sprinter, Transit and ProMaster, an 8" Hitch Extension is usually required for handlebars to clear the door. Road/Gravel is usually OK, modern mountain bike bars are too wide and can contact the rear door and the hitch extension is required.

The Piston® Pro features some of the same great features as The Piston® Pro X minus a few bells and whistles. Features like all metal construction, OneTap™ hydro-pneumatic tire arms that make no contact on the bike frame, and tool-free wheel chock slides. But don't worry, this thing still sings. - All metal construction - OneTap™ hydro-pneumatic tire arms - No frame contact - Patented FastFit™ tool-free wheel chock system - Patented PedalPivot™ - Patented Flatlock™ hitch cam - No Worries Limited Warranty - 2 – Bike capacity (Add-ons Available) - 67 lbs. per tray on 2” 2-bike, 60lbs. for 1.25” version - 42 lbs. per tray on chassis mounted RV hitch (see limited warranty for details) - 53” Max wheelbase - 5” Max tire width

- Standard 1mm tube thickness - Schrader valve

Durable enough to keep you rolling, yet light enough to not feel overly cumbersome in your jersey pocket. - Presta valve

Durable enough to keep you rolling, yet light enough to not feel overly cumbersome in your jersey pocket. - Presta valve

- 0.6 mm butyl walls

A floor pump is one of the best investments a rider can make to keep their bike ready for action. Experts agree that tire pressure affects ride quality more than any fancy frame material, the latest suspension, or high-tech wheels. In addition to ride quality, tire pressure affects traction for cornering and stopping, rolling efficiency, power transfer, flat prevention, and overall safety. A floor pump will make inflating your tires easier, faster and more accurate when compared to a small hand pump, compressor, or other inflating device. The Prestige's features include high quality steel and plastic construction for durability, a dual-head design with thumb-lock lever for easily switching between Presta/Schrader tube valve types, a top-mounted integrated pressure gauge for easily monitoring pressure during inflation, comfortable ergonomic dual-density plastic composite handle, and heavy-duty composite base for stability. The Prestige is designed with a long-stroke, narrow barrel design to quickly inflate tires, but with less effort, up to 160PSI (8 Bar) maximum pressure. - High-quality steel and plastic construction designed with performance and value in mind - Features dual Presta/Schrader head with thumb-lock lever, integrated top-mounted pressure gauge and ergonomic dual density plastic handle - Long-stroke, narrow barrel design quickly inflates with less effort up to 160PSI (8 Bar) maximum pressure

Your little ones have a youthful, intrepid spirit that sees them riding wherever the wind takes them. Most of the time, however, it takes them straight through thorns and debris, leaving you with the unenviable task of changing out flat after flat. But with our Standard Schrader Valve Youth Tubes, you'll have the peace of mind that they're riding on tough tubes that are built strong to last. And to make sure of it, they feature a molded method of construction that ensures a consistent thickness of butyl rubber— meaning that they'll roll smooth and stay tough, ride after ride. - Consistent thickness for the utmost in quality. - 32mm Schrader valve

- ISO Diameter: 507 / 24" BMX - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded Note: This product may have different packaging than pictured with a slightly different labelled size. Rest assured, the size range on the package will have the same or a broader functional range as the listed sizing of the product you ordered.

- ISO Diameter: 507 / 24" BMX - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Standard Schrader - Shaft Type: Smooth - Valve Core: Removable

- ISO Diameter: 406 / 20" BMX - Wall Thickness: 0.9mm - Tube Compound: Butyl - Valve: Standard Schrader - Shaft Type: Smooth - Valve Core: Removable

- Pocket size - CNC machined aluminum - Compact highly efficient overlapping handle - Presta and Schrader valve compatible ABS Flex Hose - Includes integrated valve core tool - Aluminum mounting bracket - 140mm/160psi - 160 PSI / 11 BAR - Length 140mm - Weight 98g - Loaded includes twin speed drive CO2 head, 20g CO2 cartridge and lever kit

The all-new aluminum Sherpa 2.0 resets the standard for user-friendly adventure. Folding tire cradles create an abundance of clearance while Kuat's foot-actuated pivot lever lets you bask in the glory of carrying a bike or eating a breakfast burrito while unfolding your rack at the same time. With features designed around your lifestyle, this lightweight rack is as easy to take off as it is to leave on. - Re-designed pivot with optional foot assist - Semi-integrated bike lock - Front tire ratchet design with an intuitive release - Rear tire cradle features a co-molded strap to protect wheels - Folding front cradle adds space between rack and vehicle - No-tool install with hand tight hitch cam system - Gloss metallic powder available in 3 colors - Low profile arced design delivers an amazing look - 2 Bike capacity up to 40 lbs. each - Holds wheelbases up to 47-inch and tires as large as 3-inch - Increased spacing between bikes to 14-inch - Lightweight platform rack design as low as 32lbs (assembled) - Available in both 2-inch & 1.25-inch hitch sizes

Nothing in the cycling world is more infuriating than flat tires. We get it, because we get them just like you. But with our Desert Protection Schrader Valve Tubes, you can minimize, if not eliminate, flats at the terrible hands of debris, thorns, or whatever else is halting your rides. Starting at the basis of the construction, we designed the tube to be thicker at the outer side, the part against the tire, in order to stop pesky bits from puncturing all the way through the tube. We then make the inner side, the part against the rim, thinner in order to reduce weight. This way, you don't have to sacrifice performance in the name of protection. We didn't stop there, however, as these tubes also feature our Airlock sealant that coats the tube for permanent protection against punctures. Not only this, but the sealant is designed to work continuously in order to prevent slow leaks from occurring, so erring complete catastrophe, you won't have to worry about flatting when you're riding over debris. We even addressed the common issue of sealant pooling with a completely homogenous design, so the tire/tube combo will always roll smooth and even. - Thicker construction on the outer side (against the tire) enhances puncture protection. - Thinner construction on the inner side (against the rim) maximizes weight savings. - Sealant coats the tube for permanent protection against punctures. - Non-toxic, non-separating formula will last the life of your tube. - Designed to work continuously in order to prevent slow leaks. - Homogenous design prevents puddles with no need to shake. - Will not dry out like the many other sealants.

When your solo ride turns into a weekend expedition with friends, the NV 2.0 Add-On lets you increase the NV 2.0 carrying capacity from two to four bikes in less time than it takes your friends to decide who gets to sit up front. - Adjustable front tire cradle system - Fully integrated cable locks - Trail Doc compatible - Front tire ratchet design with an intuitive release - Rear tire strap features a co-molded strap to protect wheels - Premium gloss metallic powder with water transferred logos - Compatible with 2” NV 2.0 - Increases 2” NV 2.0 carrying capacity to 4 bicycles weighing up to 40 - pounds each - Holds wheelbases up to 48” and tires as large as 4.8” - Quick change from 2 to 4 bikes

We're not afraid to say it—our Airlock Presta Valve Tubes are the best performing, self-sealing bicycle tubes available on the market. That's because they feature our powerful Airlock sealant that coats the tube for permanent protection against punctures. Not only this, but the sealant is designed to work continuously in order to prevent slow leaks from occurring, so erring complete catastrophe, you won't have to worry about flatting when you're riding over debris. We even addressed the common issue of sealant pooling with a completely homogenous design, so the tire/tube combo will always roll smooth and even. - Airlock sealant for greater protection. - Non-toxic, non-separating formula. - Works continuously to prevent slow leaks. - Homogenous design prevents puddles.

With years of experience and feedback, Kuat overhauled every feature and streamlined the look while maintaining the spirit of its predecessor. A re-designed pivot system with foot assist will endure a lifetime of abuse. Adjustable cradles allow for fast bike fit adjustments. Individual bike cable locks are longer, more durable, and easier to use. Holds bikes with up to 4.8-inch tires ensure a true fit for any bike in your stable. Updated ratchet arm creates an intuitive release and a more stable tow. The ground-up re-design of the Trail Doc work stand delivers a pro level feel. These are only the highlights, resulting from 3 years of extensive development, making the NV 2.0 the most advanced hitch rack on the planet. - Adjustable front tire cradle system - Re-designed pivot with optional foot assist - Fully integrated cable locks - Trail Doc included - Front tire ratchet design with an intuitive release - Rear tire strap features a co-molded strap to protect wheels - No-tool install with hand tight hitch cam system - Premium gloss metallic powder with water transferred logos - Hitch lock included - 2 Bike capacity up to 60 lbs. each - Holds wheelbases up to 48-inch, and tires as large as 4.8-inch with use of the Phat Bike Kit - Fits 20-inch to 29-inch tires - Wheel adapter needed for 20-24-inch tires - Available in both 2-inch & 1.25-inch hitch sizes - Dedicated 2-inch model is able to carry up to 4 bikes with optional NV 2.0 Add-On

Thanks to its smaller-diameter barrel, with Specialized's Air Tool HP Floor Pump it's easier than ever to inflate high-pressure tires. It also features Specialized's SwitchHitter head that works with Presta and Schrader valves, quality steel construction for excellent durability, and a three-sided base for superb stability. Plus, you'll love the comfortable, wide handle, easy-to-read oversize gauge and the nice, long hose.

- Standard 1mm tube thickness - Presta valve

Kenda Thorn Resistant tubes are available in a variety of sizes and are the most cost-effective way to prevent flat tires. At 4.3 mm these tubes are ultra-thick. - Puncture resistance built into the tube - Butyl rubber - Schrader valve, 35mm

The Air Tool Road is a minimalistic frame pump that provides efficiency and reliability for high-pressure road tires. - All new, inverted double chamber design increases the air handling capacity by 25% compared to our previous design, reducing pumping time by up to two minutes. - Presta-only head keeps size and weight to a minimum while the dust cover keeps the insides clean. - Machined outer barrel for extra grip while pumping.. - All-aluminum inner and outer chamber for durable performance. - Water bottle boss mount included. - Max pressure: 100 PSI (6.9 bar) - Volume-per-stroke: 60cc

Minimum weight and maximum protection: Tubo-MTB-Plus tubes are optimized for tire widths from 2.5" to 3.0", today’s standard for E-MTBs. Their low weight of 105g (for 27.5+) increases your battery life, and they're also a lightweight alternative to tubeless setups. - 42mm valve length

For 29er tires, more than 100g per wheel can be saved with Tubo tubes compared to standard butyl tubes—and almost twice as much space when packaged. Their riding safety is twice as high as for standard tubes and offers maximum protection against a breakdown. The assembly is just as easy as standard tubes. Tubolito tubes are also a lightweight alternative to a tubeless setup. - 42mm valve length

The least expensive way to ditch 40+ grams of rotating weight is with our Turbo Talc Tubes. A patented, oversized 4.8cm valve base prevents tearing, while a partially threaded valve stem provides a clean interface with pumps. Our lightest and most supple tube offering, it's also been proven in rolling-resistance testing to reduce drag by as much as 13% per wheel. - Packed in talc for easier installation. - 4.8cm valve base prevents issues of valves tearing off. - Smooth at the top for easier pump head insertion and reduced wear on pump internals. - Thinner tube design saves approximately 40 grams of rotating weight. - Thickness: 0.6mm

Schwalbe tubes retain air pressure considerably longer than standard tubes. The quality and purity of the rubber mixture directly affects the quality of the tube.

- 0.8mm walls (0.9mm walls for 16", 20", 24" sizes) - Puncture resistant