Filter By:
Parts & Accessories
$50.00
Our patented ANGi sensor calls for help when you can’t. In fact, it’s the first device to protect you before, during, and after a crash. It does this through a pairing with our Specialized Ride App for iOS or Android devices. And if it detects a crash, it commences a countdown that, if you’re ok, you can stop and keep riding. If, however, ANGi determines that you’re in need of help, it’ll send an alert to your selected contacts with your last known GPS coordinates and a message that you’re in need of help. What about if you’re out of service coverage? ANGi has a plan for that. Just set your estimated ride time before you head out when you know that your ride will take you out of range. All you need is an active data signal when you start your session. And if you haven’t completed your ride within that time frame, ANGi will send a notification to your contacts with your last uploaded location.
- ANGi is a ride tracker, crash detector, and safety beacon.
- Includes a one-year subscription to Specialized Ride Premium app.
- Detects and reports potentially dangerous helmet impacts to the Specialized Ride app, which notifies your emergency contacts and sends them your most recent GPS coordinates.
- Additional premium features include start ride notifications and ride-time alerts.
- Attaches to Specialized ANGi-ready helmets.
- Approximate six months' battery life on a 2032 coin cell battery.
- Weight: 10 grams w/ battery
- Two-year sensor warranty
$6.00
The SpeedZone Stem Mount w/out Transmitter is a compression cap mounting ring for SpeedZone cycling computers.
$200.00
Charge your Specialized Turbo battery with this high output, custom Li-ion charger.
• Custom Specialized Li-ion battery charger
• Output: 42V4A
• Compact design while delivering huge power
• With Rosenberger plug and light indication of the charging status
$49.00
SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete.
- Finish: Black
- Compatibility: SRAM RED eTap
$59.00
SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs.
- Up to 1000 kilometers of riding per charge
- Weight: 24g
- Finish: Black
- Compatibility: SRAM RED eTap
$22.00
Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura.
- Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.)
- Lightweight and rustproof alloy construction
- New LW-Clamp reduces weight 25 grams compared to previous models
- Aluminum bar is position adjustable and uses Hex Bolt to install and remove
- 22mm-29mm diameter
$18.00
- Machined protective case that houses the Apple AirTag under your saddle. Apple AirTag sold separately
- Casing is not waterproof but the Apple AirTag is rated IP67 (water resistant)
- Compatible with some saddle bags
- Mounts to saddle rails
$5.00
Replacement plastic insert kit for K-EDGE Wahoo Mounts.
The co-polymer insert for Wahoo 1/4-turn style computers is a replaceable item. While it is extremely strong, it is designed to fail on a significant impact before the tabs on the back of the Wahoo break.
Attributes (specs):
– Qty 1 – K-EDGE Co-polymer Insert for Wahoo 1/4 Computer (Part No. K13-1604)
– Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws
$44.00
An excellent choice for mountain, cross, and road cyclists who prefer to have the computer above the stem. The mount replaces a standard 5mm spacer and is locked securely in place by the top cap compression system.
- Supported Computers – Wahoo ELEMNT, Wahoo Bolt, Wahoo MINI
- Compatible – 1-1/8" Steerer tube Diameter,
- Thickness: 5mm, Length 50mm (Center-to-Center)
- Recommended for 0 Degree to Negative Degree Stem Angles
- CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface
- Weight: 25g
- Made in Boise, Idaho, USA
- Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded
$64.99 - $70.00
Out-front computer mount for Wahoo Element computers. This is the next generation of industry-leading Wahoo Computer Mounts – stronger, easier, more versatile, and more stylish design to compliment your Wahoo and your bike. The ultimate upgrade for your Wahoo computer.
The advanced co-polymer Wahoo insert locks your computer in place with strength and security. Designed and tested extensively so that our replaceable insert breaks away instead of your computer tabs in the event of a crash or mishap.
- CNC Machined 6061-T6 Aluminum Platform, Injection Molded Garmin Specific Co- Polymer
- Compatibility – 31.8mm and 35mm diameter handlebars.
- New clamp design is hinged for ease of installation.
- Combo Compatible – versions available that support GoPro style interface action cameras and lights. All cameras utilizing a GoPro interface, GoPro HERO series, GoPro Sessions’ series Cameras.
- Made in Boise, Idaho, USA.
- Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.
*Attention: ASSEMBLY BOLTS NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME.
K-EDGE Combo Mount are NOT DESIGNED to hold a Cycliq Fly 12. (Cycliq Fly 12 users should choose the K-EDGE K13-410, K13-420, K13-2450 GO BIG camera/light mounts.) K-EDGE mounts co-polymer plastic computer inserts are designed to hold the corresponding computer ONLY (Garmin- black, WAHOO- blue, SIGMA – red), and breakaway in a crash to protect the computer body. K-EDGE Combo Mounts are designed to hold Garmin, WAHOO and SIGMA cycling computers and Go Pro, Shimano, Garmin VIRB X sized cameras and standard sized cycling lights (Light and Motion Urban or Niterider).
Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Garmin EDGE instructions that recommend use of the provided tether leash.
$34.00
K-EDGE’s legendary CNC machined aluminum quality and strength for the price conscious cyclist. Pro positioning of your computer, out-front and flush with the top of the handlebar.
- CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface
- Compatibility: Wahoo Bolt
- Fits Handlebars: 31.8MM
- NOT GoPro Interface Compatible
- Anodized Color: Black
Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Sigma instructions that recommend use of the provided tether leash.
$25.00
Zipp delivers an uncomplicated computer mount for aerobar extensions that’s easy to install, lightweight, and vibration and slip free. The 22.3mm industry standard mount installs simply and securely on aero extensions. The Zipp QuickView TT Computer Mount is aerodynamically shaped for left-side installation, but also can be installed on the right bar extension. It comes with a single Torx T25 bolt, flexible mounting clamp, and a quarter-twist mount.
$35.00
Handlebar computer mount for Garmin/Wahoo for Vuka Shift AXS
$18.95
• When aerobar space is tight, place your computer on top
• Tuck straw on either side for best aerodynamics
• Fits on TORPEDO SYSTEM 100, TORPEDO SYSTEM 400 & REFILL UPGRADE KIT BOTTLES (each sold separately)
• Compatible with most computers, including large screens (sold separately)
• Glass-reinforced nylon
• Weight: 18.5 grams
$98.95
Aerodynamic dual-bottle BTA hydration system that features a dynamic, multi-position computer mount to accommodate your changing needs. Raise the computer mount up to tuck in a refill bottle for race day, or lower it down for a standard bottle while maintaining the optimal view for training days.
- Telescoping Garmin mount features on-the-go tilt adjust to avoid glare.
- Zero-leak design with a sealed viewing window to easily monitor liquid levels, and a leak-free Dolphin Breather Valve that lets air in but doesn't let water out.
- Capacity: 26oz (768 mL)
- Material: Plate: 6061-T6 Aluminum
- Cage: Nylon Composite Vee Cage
- Computer Mount: Nylon Composite
- Bottle: Lead free, BPA-Free and HDPE food safe certified bottle
- Brackets: Nylon composite with Velcro straps coated with no-slip extension grip - Adjustment Width: 75-150mm
- Weight: 9.3oz (265g)
$35.95
Telescoping Garmin Computer Mount for Versa Plates. Raise the computer up for Refill Bottles, or lower it down to clear Standard Bottles. On-the-go tilt adjust to avoid glare.
- Telescoping computer mount makes for a seamless switch between Refill or Standard Bottle
- Compatible with Garmin bike computers and Multisport Watches
- Requires Versa Carbon Mount or Versa Aluminum Mount
Telescoping Garmin-Specific Computer Mount
- Raise the computer mount up to tuck in a Refill Bottle for race day, or seamlessly lower it down for a Standard Bottle to maintain the optimal view for training days. Compatible with Garmin bike computers and multisport watches.
On-the-Go Computer Tilt Adjust
- Avoid changing glare with a tilt mechanism for easy adjustments while you ride
Arrives Fully Assembled
- Few steps required to install and head out on your first ride
- Weight: 1.9oz (54g)
- Construction: Nylon Composite
Includes
- Fully assembled computer mount
- 2 screw sets: one for Versa Carbon Plates, and one for Versa Aluminum Plates
Warranty: Limited Lifetime
$14.99
With this adaptor piece, you are able to easily convert any Garmin quarter turn bike computer mount to a Wahoo bike computer mount.
$14.99
Our stem mount for Wahoo ELEMNT GPS bike computers is made of lightweight, durable plastic and is a great solution for cyclists who prefer to keep their computer on top of the stem.
- Fits any stem
- Weight: 0.2oz
- Works with ELEMNT, ELEMNT ROAM, ELEMNT BOLT, and ELEMNT Mini
Note: BOLT loses aerodynamic advantage with this mount)
$119.99
This handlebar bracket has been developed so you can attach a tablet to your handlebars. The design provides a safe distance so that no sweat falls on the screen while you are training.
- Suitable for handlebars with a diameter ranging from 26mm to 35mm
- Adjustable to different tablet sizes: length 182-267mm, width 112-197mm, max. thickness 13mm
$30.00
Securely holds your Turbo Connect Display/Speedzone 2 computer.
- Specialized Turbo Connect Display mount.
- Left- and right-side compatible.
- Mountain bike design situates a CPU above stem.
- Fits 35mm handlebars.
$30.00
Securely holds your Turbo Connect Display/Speedzone 2 computer.
- Specialized Turbo Connect Display (TCD)/Speedzone 2 Display mount.
- Left- and right-side compatible.
- MTB-style above-the-stem mount.
$30.00
Securely holds your Turbo Connect Display/Speedzone 2 computer.
- Specialized Turbo Connect Display (TCD)/Speedzone 2 Display mount.
- Left- and right-side compatible.
- Road-style above-the-stem mount.
$25.99
$35.00
26% Off
Connects the Specialized SL Range Extender Battery with 2nd generation Turbo Levo SL Comp, Comp Carbon, Expert Carbon, and S-Works models.
Custom connector with lock mechanism ensures a secure connection.
Length: 145mm
$1,000.00
This custom Li-Ion Turbo Vado Battery features a 604Wh capacity and is compatible with all Turbo Vado models. It's fully integrated with the frame, removable for easy charging and lockable for added security.
- Please Note: The Turbo Vado Battery does not include a battery cover.
- Battery features a 604Wh capacity.
- Works with all Turbo Vado models.
- Lockable and down tube integrated.
- Chargeable either on- or off-the-bike.
- Includes LED power indicator.
$19.99
Enjoy easy viewing with the Butler Out Front handlebar mount!
Out Front Mount for following models:
BC 1909 STS
BC 2209 STS
ROX 5.0
ROX 6.0
ROX 8
ROX 8.1
ROX 9
ROX 9.1
*Note: not for use with ROX 10.0
$165.00
- Di2 internal battery, fits all e-Tube Di2 groups
- Capacity: 500 mAH (± 2000km)
- Use with EW-WU101 or SC-MT800 interfaces/junction to gain BlueTooth Smart wireless connectivity for on-the-fly adjustments with smartphones and tablets
- Requires SM-BCR2 charger
$184.99
The new DN300 Built-In type battery features the same waterproof design that Di2 users have loved for generations. Now with 3 ports, it delivers stable power to Shimano's 12-speed road derailleurs (and shifters if a fully wired option is selected).
- Compatible with thinner next-generation electric wire SD300 and systems after R9250/R8150 series
- Li-Ion type
- Capacity: 500 mAH |3.7Wh (± 2000km autonomy)
- Rated voltage: 7.4V
- Charges through RD-R9250 |RD-R8150 rear derailleur using EW-EC300 Di2 Charging Cable (sold separately)
- Fixing small parts included
- Weight: 52g
$79.99
Shimano BT-R1A External Di2 Battery
- All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions
- Use Di2 system checker to update component firmware
- Di2 External Battery, battery charger, and power cable are universal between Dura-Ace 9070, 7970, Ultegra 6870, 6770 and Alfine Di2 systems
- Battery weight: 71 grams
Page 1 of 5
Next page