Bike Equipment

The Compound pedals are fully serviceable with sealed bearings and chromoly pins and spindle. These pedals beg you to challenge them as they continue to perform hassle free for as long as you let them. Not only will they surprise you with durability, but the colored composite pedal body never fades or shows wear as the color runs throughout to deliver a fresh pedal day in and day out. - Lightweight injection-molded nylon fiber composite body - Replaceable chromoly pins - Super-thin profile - DU bushing and double-micro-sealed bearing system - Fully sealed, rebuildable, thin, and offer the same grip as a traditional aluminum pedal - Nylon fiber blend does not get hung up on rocks or ledges - Nylon fiber body does not shatter - 9/16"

Compatible with: - Hardcore bike fenders - 700c x 45mm - Full bike fenders - 700c x 45mm - SpeedEZ bike fenders - 700c x 45mm - Hardcore Recumbent bike fender - 700c rear - Contains 45mm rear fender plastic clip, fork and brake bridge thru bolts, stay bolts and lock washers

Compatible with: - Full bike fenders - 26" x 60mm - SpeedEz bike fenders - 26" x 60mm - Hardcore bike fenders - 26" x 60mm - Contains 60mm rear fender plastic clip, fork and brake bridge thru bolts, stay bolts and lock washers

The Hardcore Fender Hardware Kits are compatible with select Hardcore fenders, Full Fenders, Hardcore Recumbent Fenders, and SpeedEZ fenders. Includes: - Rear fender plastic clip - Fork and brake bridge-thru bolts - Stay bolts and lock washers Specific compatibility w/Planet Bike fenders: - 35mm Width: 700c x 35mm Fenders (Hardcore) - 45mm Width: 700c x 45mm (Hardcore, Full, and SpeedEZ); 700c Rear (Hardcore Recumbent) - 60mm Width: 26-inch x 60mm (Full, SpeedEZ, and Hardcore)

- Contains 2 Mudflaps and Quick-Snap Attachments - Compatible with all hybrid (45mm) fenders (part#s 7004, 7006, 7013, 7015) (sold separately) - For use with 45mm width fenders (sold separately)

Topeak's MTX DeFender is the perfect addition to your RX BeamRack. It clips seamlessly to the rack and provides valuable protection against moisture and trail grime.

- The seat bag alternative - Stash your stuff at a lower center of gravity - Two convenient size options, small or large

- Rubber straps - Fit Raceblade, Mud-x - Set of 8

- Contains 2 Mudflaps and Quick-Snap attachments - Compatible with: ATB Hardcore and SpeedEZ fenders (sold separately) - For use with 60mm width fenders (sold separately)

Be seen with CatEye's Omni 3 Taillight, which uses Omni Directional Technology for 360 degrees of visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 200 hours. Plus, CatEye's tool-free mount makes installation a breeze.

Dimension Junior Pedals. - Molded nylon, 1-piece, caged-type pedals - Built-in reflectors, will not accept toe clips - Overall pedal size is 80 x 60mm - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch or 1/2-inch - Pedal Type: Platform - Spindle Material: Chromoly Steel - Weight: 230g (9/16-inch); 304g (1/2-inch)

Make sure you have excellent rear visibility at night with the Blinky 3. This sweet taillight aims 3 bright LEDs directionally to provide visibility from up to a mile away. Its soft-touch power switch accesses flashing or steady modes for up to 100 hours of run time on the 2 AAA batteries (included). And, it includes seatpost and seatstay mounts.

The X-Long Spoiler is designed to add extra coverage to SKS fenders. - Compatible with 45mm versions of the Chromoplastic, Commuter II, Long Board and Raceblade fender models - Easily mounted by consumer with included hardware - Sold as Each

Long battery life combined with simple, tool-free mounting makes MSW Mouse lights a great economical pick to be seen on the road. - Simple, tool-free mounting on bars from 22.2 - 35mm - 3 lighting modes: high, low, flash - CR2032 battery included

Addd an extra dose of stability to SKS's Velo 42 and Velo 47 fenders. A stainless steel U-stay mounts to the fenders and your frame eyelets to eliminate rattling and bouncing fenders.

Keep water and mud off you with SKS's Mud-X down tube fender! This versatile fender works with most bikes regardless of wheel size.

- Guards against mud - Made from 100% recycled plastic waste - 100% recyclable - Supplied with 4 zip ties - Made in England

The S-Guard is not just for road bike cyclists; this super-lightweight (24g) and small mudguard protects your bottom from mud and water. Made with super-soft material, it fits on nearly every saddle with the addition of a cable tie.

The TL 6.0 will help keep you safe and seen from behind (210-degree visibility). The TL 6.0 operates on 2 AAA batteries (included) for up to 60 hours on flash. Features - Lumen Output: 25 - 4 Modes with a Run Time up to 60h - 2 x AAA Alkaline Battery Powered - Weight: 70g - Battery: 2 x AAA Alkaline - Increased safety with 210° of Visibility - Budget Friendly Rear Lighting System - 25 Lumen taillight with Eye Catching Flash Patterns - Water / Dust Resistant IP64 Rated Run Time - Up to 60h

Planet Bike's Grunge Board is an easy-to-mount front fender that keeps you dry and clean when it's wet and muddy. It's made from a nearly indestructible polymer and it mounts in seconds to your down tube with the 2 rubber straps.

SKS's Cage Box offers light, simple storage for your on-the-go essentials. With enough room for your tools, mini pump, and a tube, the Cage Box slides easily into your water bottle cage for a rattle-free, easy access storage solution.

The Mudrocker Rear Extender can be snapped on and used for extra protection in the bottom bracket/derailleur area. This item is included with the Mudrocker Rear Fender, but we offer it here as a replacement. - Made in Germany

Easy to install and available in various colors and designs, the Splash Pad Front Fender won't let wet weather spoil your ride. It's designed for use with a range of bicycle styles and compatible with suspension forks. - A low-profile, easy-install fender that keeps riders clean in various conditions - Fits wide range of wheel sizes - Tool-free installation - Zip ties not included. Color zip tie options available through Problem Solvers.

Easy to install and available in various colors and designs, the MSW Splash Pad Rear Fender won't let wet weather spoil your ride. It's designed for use with a range of bicycle styles and is compatible with standard saddle rail configurations. - A low-profile, easy-install fender that keeps riders clean in various conditions - Fits wide range of wheel sizes - Tool-free installation - Zip ties not included. Color zip tie options available through Problem Solvers.

Simple solution to keep the spray down when the weather turns nasty - Attach to the fork crown and legs with zip ties - Compatibility: universal - Width: 120mm - Color: black - Weight: 20g

Lightweight and stealthy, Muc-Off Ride Guards keeps mud fling to a minimum. - Guards against mud - Made from 100% recycled plastic waste - 100% recyclable - Supplied with 4 zip ties - Made in England

Lightest and most versatile MTB mud guard available. - Uses hook and loop Velcro straps to attach to the bridge and lower legs - Compatible with forward and double bridge fork designs and all wheel sizes - XL version is longer and provides more coverage - Reverse version is designed for forks with reversed bridges - Fat Face Fender MV0035 updated to be compatible with FatBike suspension forks - Fat Face Fender XL, you guessed it, extra wide for FatBike applications

Odyssey Twisted PC pedals-extremely simple, lightweight, inexpensive and famously durable plastic-bodied design.Often duplicated but never replicated. - High-strength plastic composite

Meet the brand new, fantastic, feature packed Face Fender! Lightweight, discreet, and very effective, the Face Fender is a simple front mud guard for mountain bikes, made from 100% recycled plastic. SHIZZLE SHIELD - Integrated into the Face Fender is the Shizzle Shield, which, when folded toward the tyre, stops pretty much anything from being flung forward and hitting you in the mush. NO MORE ZIP-TIES - No more zip-ties! The fender is profiled to hold the Velcro fastener without needing zip-ties or anything else.

Super bright and compact, Cateye's Omni 3 Front Safety Light uses CatEye's Omni Directional Technology for increased visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and extend the run time. Plus, CatEye's tool-free FlexTight mount makes installation easy.