Cables

Jagwire's Cable Grips are adapters that make it possible to run hydraulic brake lines on bicycle frames that have housing stops that were designed for regular wire cables and standard housing sections. Once the regular cables and housing sections are removed, the Cable Grips are inserted and tightened in place in the standard frame stops. Then, the hydraulic lines are attached and securely held in place by the gripping jaw(s) of the Cable Grips. - Aluminum model accepts lines up to 5mm in diameter and the lines snap in. - Stainless model grips fully around the lines and is adjustable to fit most diameters.

Replacement grub seals for Jagwire Elite Sealed kits. - Material: Rubber - 10 Pieces

- 4mm compressionless housing - Housing Length: 50m - Shift Housing Diameter: 4mm

Jagwire 4/5mm Wedge Type Housing or Hose Guide Bag of 50

Jagwire Elite Link housing is the ultimate combination of durability and attention-grabbing looks. Available in six eye-catching colors, they're designed to improve any bike's performance and appearance. The housing uses a series of aluminum links to provide a compressionless system for precise shifting performance. But unlike typical compressionless housing, its flexibility allows for tight bends without kinking. It's also lighter than traditional linear strand shift housing while being more durable. Combine these benefits with Elite, ultra-slick polished cables and Slick-Lube liners, and you've got the best of performance and style. - Precise, compressionless shifting performance combined with extreme flexibility - Each kit comes with links pre-installed on housing segments making setup quick and simple - Ultra-slick polished inner cables minimize system friction - Durable aluminum housing won't kink or rust and is 20% lighter than typical shift housing - Includes enough housing and end caps to reach a rear derailleur or internally geared hub on a typical frame - Bikes with extra-large frames or unusual cable routing may need additional links and/or liners; service parts are available separately

Jagwire's flexible shift housing is used for the rear housing segment with Shimano Shadow-type road rear derailleurs to give optimum shifting performance and the flexibility needed for wheel installation and removal. - For use with Shimano Shadow type road rear derailleurs, such as RD-R9100, RD-R8000, and RD-R7000. - 4mm low-compression CGX-SL housing construction. - Includes 10x sealed end caps and 10x 4mm/4mm housing connectors

Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - SRAM/Shimano mountain compatible cable end - Single end cable features weld-cut for easy installation

Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic lines (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to enhance braking performance and simplify disc brake setup. Each adapter kit contains all the components required to connect both front and rear lines to the levers calipers.

Mountain Pro Quick-Fit kits allow the easy installation of Jagwire hose with Shimano disc brakes. Kits contain enough hardware for both front and rear brakes. - Requires Jagwire Mountain Pro Universal Disc Brake Hose Kit for installation - Compatible with: Shimano Deore M596, M615

Inline adjusters make on-the-fly derailleur cable tension adjustments safe and easy. - Indexed adjustment for braided shift housing - Not recommended for use with brake systems - Size: 4.5mm

Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic hose (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to optimize braking performance and durability. This adapter kit contains all the components required for Hayes brakes and includes enough hardware for one bicycle.

Rotating S-hooks securely hold housing segments together and prevent undue noise and migration. - Two halves rotate 360 degrees - Compatible with 4mm or 5mm housings

Jagwire's M6 Adjusting Bolt is a metal adjusting barrel that is the correct replacement adjusting barrel for the cable clips/hangers found on many cable brake systems old and new. It makes it easy to tighten/loosen your brakes without tools. Its 6 x 1.0mm threading fits most clips/hangers and it has a lockring for locking your brake adjustment once it's set. You get a pack of 25.

Basics shift cable and housing set provide replacement level quality in an easy-to-use double ended package. - Non-extruded galvanized inner cable - Lead-free PVC housing - Double ended for SRAM/Shimano and Huret/Simplex - Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters - Color: Black - Diameter: 1.2mm - End Type: Shimano/SRAM - Housing Diameter: 5mm

Jagwire's Sealed Shift End Caps are the important housing ferrules placed on the end of housing sections to optimize your shifting. They are available in 2 types to fit most housings and they feature small rubber O-rings to help prevent moisture and grit entering the housing and fouling your shifting. These ferrules are best used with derailleur cable and housing.

Jagwire file boxes pack a lot of cables into a small space for easy access. - Pre-stretched - Single-ended cables feature a weld-cut for ease of installation - SRAM/Shimano mountain compatible cable end - Slick cable is die-extruded for smooth operation - Stainless steel option resists corrosion - Cable Head: Shimano/SRAM Mountain - Defined Color: Silver - Diameter: 1.5mm - Double Ended: No - Length: 1700mm - Quantity Included: 100 - Width: 1.5mm

Jagwire's M7 Adjusting Barrel is a 7 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right part for many older-style mountain bike brake levers. It comes in two models and is made of durable metal with a lockring for locking your adjustments. You get a pack of 10.

Fittings for converting open loop housing holders on a frame to traditional cable stops. - Fits snugly inside open loop and receives 5mm housing with no end cap - Large flange for larger hydraulic loops - Flattened on one side to accommodate frame

DIY Kit Includes: - Housing and Shift Cable - End caps and cable tips - Compatible Shimano/SRAM Specs: - Cable Material: Galvanized - Intended Use: Road/MTB - Cables & Housing Comp: Shimano/SRAM - Housing Length: 2000mm

- 4mm compressionless housing - Low friction polymer liner - Housing Length: 200m

- 4mm compressionless housing - Slick-Lube liner (SL) - Housing length: 50m

Lined end caps have an internal sleeve that extends out from the end. This liner protects the inner cable from the opening in the end cap, preventing cable coatings from wearing off and ensuring the lowest possible friction. Lined end caps can also be paired with a sealing liner or a dirt guard to keep dirt and grime out of the housing. Use lined end caps whenever you use Teflon-coated cables to protect the coating.

Rotating S-hooks securely hold housing segments together and prevent undue noise and migration. - Two halves rotate 360 degrees - Connects 4mm or 5mm housing to electronic shift wire

Innovative Elite Ultra-Slick derailleur cables offer top end performance without the problems associated with coated cables. The cable surface is highly polished to remove friction causing imperfections on the cable surface. These cables are a great fit for bikes with full cable housing and modern drivetrains. - Diameter: 1.1mm - Double-ended: No - Highly polished, ultra-slick uncoated surface delivers incredibly accurate, smooth responses - Compatible with all performance housing and lubricants - Uncoated surface means there's nothing to flake off during installation or riding, so it delivers the most durable, consistent performance - Stainless steel wires are corrosion resistant

Extend housing runs using these double-ended junction end caps.

Frame-mounted barrel adjusters allow cable tension to be easily fine tuned. - Adjuster threading is M5 standard: 5mm OD, 0.8mm thread pitch - Bag of 10

Jagwire's Universal Cable Tips are crimp-on aluminum caps for finishing the ends of 1.8mm and smaller diameter cables. They prevent the cables from fraying and come in colors to add style to your ride. Choose from two color mixes in bottles of 30.

Jagwire Elite Link End Cap Packs include each of the specialty housing end caps found in the corresponding Jagwire Elite Link DIY kit. - Includes specialty end caps for the 2x Elite Link Shift Kit

Jagwire's Frame-Mount Adjusting Barrels thread into the housing stops on most road frames and allow easy adjustment of cable tension for fine-tuning your shifting. They are made of aluminum for light weight and durability and have fluted, rubber-coated rings for easy turning by hand.

Jagwire Mini Combo Boxes contain needles and compression bushings for many common hydraulic disc brakes. - Includes a variety of common fittings for a range of disc brakes from SRAM, Avid, and Shimano

Jagwire's Aluminum Housing Connectors allow joining two sections of the same-size cable housings together in case you only have shorter sections and you need to make a longer one. It comes in 4 and 4.5mm diameters. Match the diameter of the housing sections on your bike. - Comes in a pack of 10

Basics brake cables provide value on a budget. - Double ended for compatibility with SRAM/Shimano road and mountain brakes - Pre-stretched - Cable Head: Shimano/SRAM Road, Shimano/SRAM Mountain - Color: Silver - Diameter: 1.6mm - Length: 2795mm

Inline adjusters make on-the-fly derailleur cable tension adjustments safe and easy. - 5mm - Stronger detent mechanism for use with brake housing - Perfect for mechanical disc brakes

Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic hose (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to optimize braking performance and durability. This adapter kit contains all the components required for Hope brakes and includes enough hardware for one bicycle. Compatible with the following Hope brakes: - Tech 3 X2 - E4 - V4 - Race Evo X2 - E4 - M4 - Tech Evo X2 - M4 - V2 - Race X2 - Tech X2 - M4 - V2 - Mini - Mini Trials - Mono Mini - Mono M4 - 6TI - Moto V2 - M6 - Hope Banjo

Aluminum, Lightweight, Lubricated An alternative to traditional compressionless housing, this system is made of nesting alloy pieces that protect the liner. Although this housing is typically more expensive, it has several advantages including increased flexibility, reduced weight and increased durability. Both shift and brake housings use identical Slick-Lube liners and interconnecting alloy pieces. - Slick-Lube liners reduce friction and protect against corrosion - Includes four 2300mm liners

Jagwire's Lined End Caps are nice ferrules designed for the ends of shift cable housing sections. They feature a small nylon extension on the end that helps reduce friction and adds protection for coated cables, too. You get a bottle of 50 for all your bicycle setup needs.

- 5mm derailleur housing

Jagwire's Alloy Straddle Cable Carrier w/Liner is a nice upgrade for your cantilever brakes. It's made of light and durable aluminum and has a liner for smooth action.