Forks

Climb mountains. Charge descents. SID Ultimate isn’t like other XC forks. It is lighter than ever with a formidable 35mm chassis that holds the line when you’re on the edge. The new Race Day 2 damper offers reliably rock-solid Lock and plush Open compression positions. With more positive and negative air volume, SID’s latest DebonAir+ spring delivers sensationally smooth action at the top of the travel and full tunability for any rider or race. Features: - NEW 35mm chassis is the perfect¬ blend of light weight and rigidity for the modern XC bike. Plus, we made it lighter…again. - NEW Charger Race Day 2 damper is the lightest damper on the market. This 2P damper features two-position compression adjustment: Open or a rock-solid Lock. - NEW DebonAir+ provides more small-bump sensitivity and tunable mid-stroke support. - NEW Bushing package maximizes bushing overlap for a smooth, solid ride. - NEW Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride. - NEW Crown machined to shave weight without compromising strength and stiffness. - NEW Electric Red Signature colorway - NEW Bolt-in torque cap adapters included for use with standard hub end-caps.

- 35mm chassis with a focused all-mountain mindset - satisfyingly stiff, efficient and designed to eliminate as much weight as possible. - ButterCups block 20% of high frequency "trail chatter". Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - Charger 3 features a new Internal Floating Piston (IFP) design with better fidelity, performance and truly independent adjustments without any "cross talk". - DebonAir+ is built to balance butter-like small bump feel, increased air volume, and higher overall ride height - Ultimate Bushing Package maximizes the fork's bushing overlap, reducing friction and creating the smoothest ride possible - Pressure Relief Valves eliminate unwanted air pressure build up in the lower leg caused by variations in altitude or temperature. - RockShox premium short fender included

- Performance-packed, featuring an updated 38mm chassis, now compatible with new Pressure Relief Valves. - 38mm chassis for increased stiffness and rider confidence - Charger RC damper featuring Low Speed Compression adjust - DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep. - Compatible with new Pressure Relief Valves - Maxima Plush Dynamic Suspension Lube reduces friction and enhances fork performance ride after ride - Bolt-in torque cap adapters now included for the use with standard hub end caps

Matching fork for the Soma Jawbone B-Type frame. - Tange CrMo steel - Fits QR hubs - Axle to Crown: 425mm - Rake: 50mm - IS disc mounts, rotor fit up to 180mm - Two sets of cargo cage bosses per leg, pannier rack bosses on inside and outside leg - Two sets of fender/rack eyelets at fork ends - 29" tire clearance: 2.25" - 27.5" tire clearance: 2.8" - 350mm Steerer Tube If you are getting this fork for the Jawbone, you need a ZS44 headset. Can be used as a rigid fork on some early 90's mountain bikes.

The Mattoc is an amazing fork due to its versatility yet made even more amazing as its capability to do it all comes without compromise. The “versatile specificity” of this fork means that it adapts perfectly to many disciplines and styles of riding while performing flawlessly in each and every one. The Mattoc Comp’s 34mm Manitou-engineered chassis keeps weight to a minimum while maintaining best-in-class stiffness. Its Expert Air spring with IVA technology, ABS+ compression damping, and in leg adjustable TPC rebound damping make for the smoothest ride you’ve experienced yet. With air, air volume, rebound, and compression adjustments that smooth ride can be tailored to your specific needs. The next step to a better ride starts with Mattoc, #thepeoplesfork. Key Features: - 27.5” is 20g less than the previous model. - Expert air allows for internal travel adjustments with no added parts. - Expert Air spring systems contain a unique balancing valve that equalizes the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel. Expert Air has identical performance to Dorado Air in a more cost-effective package. - Incremental Volume Adjust (IVA) modifies the volume in the positive air chamber with self-contained spacers dictating the position of the IVA piston. This allows the main air spring ramp-up to be tuned to the rider weight, style and conditions without the need for additional parts. - Absolute Plus (ABS+) is a shim stack-based damper that features external incremental Low-Speed compression adjustment. - 27.5” 110-150mm, 29” 110-150mm. - TSR (Trail Side Relief) casting bleed screws allow users to release casting pressure from the fork. Casting pressure increases during normal riding. Extreme riding can increase the pressure at a quicker rate. Temperature and elevation changes can also cause increased casting pressure. Releasing casting pressure can improve overall fork feel and small bump compliance. - Expert air spring and lower weight brings top-level performance to a new price point.

The Z1 is freedom from the status quo. Step outside enduro's obsession with counting seconds and go have some fun in the woods. The Z1 is an aggressive all-mountain and enduro fork with a different viewpoint for riders' priorities. Everyone wants suspension performance that's smooth as butter with great traction and control, and that's where the Z1 shines. After that, the Z1 departs from industry norms. More time fiddling with adjustments means less time shredding the trails. The Z1 keeps it simple with intuitive compression sweep adjustment, from locked out to full open. Simple rebound adjustment covers the range from fast to slow rebound for a full range of rider weights and preferences without overcomplicating things. Plus, it's biased towards stiffness, ride performance, and durability, so while it's carrying a few extra grams, you probably won't notice because you're having too much fun. - 36mm stanchions - Enhanced lower leg stiffness with "M" arch design for maximum tire clearance - 15 QR x 110mm Boost axle - FIT GRIP damper with adjustable compression and rebound - FLOAT EVOL air spring

The Cane Creek Helm MKII Air Suspension Fork features an upgraded damper design for increased support and control and a redesigned air spring that allows for increased air volume for better traction and suppleness. - Compression and midvalve circuit offer increased support and control - SKF oil seal head cartridge and wiper seals are low friction - The redesigned air spring offers increased air volume for better traction and suppleness - The threadless air seal head allows for easier travel change - Damping features include: high speed compression, low speed compression, and low speed rebound - Adjustment options include: high speed compression (10 positions), low speed compression (17 positions), Low speed rebound (10 positions), independent positive air spring, independent negative air spring, and an indexed travel system (8 positions) - Double-Air spring system: high volume positive and negative air springs - "D-Loc" 15mm bolt-on thru axle

Built for endless days in the mountains, Pike Ultimate Flight Attendant will keep you out past dinnertime. The groundbreaking automatic suspension system has an improved algorithm with all new personalization to match your riding preferences, your terrain, your style, and your physical capabilities. Pike is upgraded with the Charger 3.1 Flight Attendant damper for the right balance of comfort, control, and speed. The industry-leading automatic suspension system now boasts a fork that’s better than ever before. Features: - NEW Remove suspension complexity to elevate your ride experience. Flight Attendant has an all new algorithm that uses a suite of sensors to read rider and terrain inputs to anticipate the perfect suspension position. No other suspension system has this level of personalization to match your riding preferences, your terrain, your style, and your physical capabilities. Elevate your ride. NEW Flight Attendant features include fork-only update for hardtail bikes, Launch Control, and customizable Auto Mode to disable "Pedal" or "Lock" positions. - NEW To meet the demands of the world’s best riders, Charger 3.1 Flight Attendant electronic automatic damper is a brilliant evolution of our proven Charger 3 damper platform. With a refined compression range, the Charger 3.1 Flight Attendant damper gives you the traction, control, and comfort you need to charge dicey lines all day. - NEW Ever on the quest to eliminate friction, a new bushing package further reduces friction with an updated process at the factory level to give riders a better feel right out of the box. Available in NEW Electric Red Signature colorway or Ultimate High Gloss Black. - Updated DebonAir+ air spring for Pike, with increased volume in the negative chamber for improved traction and small-bump sensitivity. - ButterCups block 20% of high frequency “trail chatter”. Limiting these vibrations massively reduces hand and arm fatigue, leaving you feeling fresh with more control. - Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride. Bolt-in torque cap adapters now included for use with standard hub end caps. - Lightweight machined and anodized crown for premium looks and durability. - Ultra-low friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel. - Short fender compatibility. (RockShox fender included)

Redesigned by the world’s fastest racers, for the world’s fastest racers, you want BoXXer in your corner. The all-new 38mm chassis is equipped with the DebonAir+ twin tube air spring that will have you thinking it’s a coil. Paired with a Charger 3 RC2 damper tuned for downhill speed, BoXXer Ultimate takes you straight to the top step of the podium. And with our new crown adjustment lines, setup is a breeze—no rulers required. FEATURES - 38mm chassis designed to meet the needs of the world’s fastest racers with balanced stiffness and ride quality - DebonAir+ twin tube air spring strikes the perfect balance between butter-smooth small bump feel, added support throughout the travel, and taller ride height for confidence when things get steep - Signature colorway BoXXer Electric Red with an all-new graphics package - RockShox premium fender compatibility (RockShox Bolt-On Fender included with purchase) - Lightweight machined and anodized crown for premium looks and durability - Crown height gradient creates a visual guide to simplify setup, no ruler required - Charger 3 damper tuned for BoXXer’s updated chassis and spring. Featuring High Speed Compression, Low Speed Compression, and a revamped Low Speed Rebound, every click is meaningful and exact. This allows the rider to tune to perfection with every click. - ButterCups block 20% of high-frequency “trail chatter” to reduce hand and arm fatigue, leaving you feeling fresh with more control - Ultra-low-friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel - Maxima Plush damping fluid reduces friction and silences damper noise - Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride

The Circus project started as a way to get our slopestyle riders into competition, but it wound up becoming an industry-leading dirt jump fork for riders all over the world. Circus has set the benchmark for everyday riders' jump session requirements and delivered podium results at pro-level competitions for almost a decade. - 80/100mm or 120/130mm Internally Adjustable Travel - Air Spring - ABS+ Compression Damping w/ Jump Stack - Adjustable TPC Rebound Damping - Wheel Size: 26" - 130mm travel models can be reduced to 120mm and 100mm models can be reduced to 80mm travel using included spacers - 20mm hex axle provides superior torsional stiffness - Absolute+ cartridge platform oil damping system: specifically tuned for Dirt Jumping - Forged I-beam style crown: bigger, stronger, and more durable - Alloy steerer, and 32mm aluminum stanchions

- Tange Infinity CrMo steel unicrown fork for 26 MTB wheels - Suspension corrected for 80mm travel 26 frames 40mm rake - All have 51mm International Standard disc mount

Engineered for unforgiving descents, technical race lines, and the world's most demanding riders, FOX introduces Factory 36 Podium Inverted, a new benchmark in single crown fork performance. Delivering exceptional fore-aft rigidity, ultra-smooth travel, and DH-style confidence, Podium brings an unfair advantage to enduro racers and all-mountain riders alike. Podium is designed to be ridden like a downhill fork. No barriers. No hesitation. Complete confidence that your front wheel will hold the line, no matter how fast—or how big—you push it. All this while keeping your bike in a familiar range of travel and geometry in a single crown package. Fox designed this inverted fork to get the absolute maximum performance out of the industry leading GRIP X2 damper, with every possible gain for smoothness in its travel and confidence-inducing fore-aft rigidity in the chassis. Welcome to the Unfair Advantage. Welcome to Podium. - To take full advantage of a damper’s capabilities, FOX engineers pursued the optimal design to provide ultra-low friction under load by turning the traditional fork design on its head with an inverted chassis, providing unmatched damping sensitivity when combined with the award-winning Grip X2 damper - At the core of Factory 36 Podium Inverted is uncompromising fore-aft stiffness made possible by oversized 47mm upper tubes and a generatively-designed crown structure, allowing riders to hold precise lines with total confidence—even at downhill speeds - To further increase torsional stiffness, FOX replaced the standard 15mm axle with a steel 20 x 110mm Boost DH axle, distributing forces more evenly across the lower leg interface - 175mm of bushing overlap is 32% more than the 38, and even 7% more than the FOX 40, to deliver an unbeatable chassis stiffness and reduced friction under heavy loads - The FLOAT EVOL GlideCore air spring, designed with built-in lateral and axial compliance, allows the spring to flex with the fork under high loads, reducing binding and stiction for a smoother ride feel, improved small bump sensitivity, and better control when the terrain gets wild - Specially tuned GRIP X2 damper, known for its four-way adjustability and race-proven control, offers enhanced compression damping to match the fork’s reduced friction and slightly softened rebound to balance lower unsprung mass, resulting in a damping curve designed for aggressive descending, enduro competition, and eMTB domination - Full oil immersion keeps seals constantly lubricated while gravity helps shed contamination and reduce friction - Kashima Coating on lower tubes for added durability

Premium performance at down-to-earth prices. Judy now includes all of the 30mm MTB and E-MTB forks, with axle and steerer options to match any spec. Gold level gives you aluminum upper tubes and Motion Control damping. Features - New graphics package with E-MTB endorsement option (15x110mm) - Motion Control damping featuring low-speed compression adjustment to lockout - Fits Tires up to 2.8" - Fast Black finished 30mm aluminum upper tubes couple stiffness and lightweight with a premium look - Highly tunable Solo Air spring

The Straggler fork is very much like the Cross-Check fork — it's a lugged and brazed CroMoly fork with room for 700c tires up to 50mm wide. Both feature fender and rack mount eyelets at the dropouts, mid-blade threaded rack mounts and threaded eyelets on the sides of the crown for accessories. Both deliver a resilient ride and are finished in black powdercoat. The Straggler fork is equipped with a 51mm I.S. disc caliper mount and no accommodation for rim brakes. - Axle-to-crown: 400mm - Offset: 44mm - Steerer: 300mm, 1-1/8" straight (42-58cm), 350mm, 1-1/8" straight (60-62cm) - Tire Clearance: 50mm (w/o fender) Weight: 2.5 lb (1.15kg) uncut

Like its QR cousin, the Disc Trucker Thru-Axle Fork is designed to mount racks and fenders and haul your worldly possessions. It's also got modern touches like dynamo routing, compatibility with flat-mount disc brakes, and three-pack mounts on both fork blades to satisfy your deepest cargo desires. Captured 12mm thru-axles make tool-free removal and installation possible. Offered in 26" and 700c wheel sizes, the Thru-Axle fork clears 26 x 2.1" or 700c x 47mm tires. With a 1-1/8" steerer, it's powder-coated and constructed using the same Chromoly steel as all our other frames and forks. Why? Because we swore a blood oath to steel and we intend to keep it. Note: The Disc Trucker TA Fork is designed to pair best with second-generation Disc Trucker models—those first released in 2020. Defy this guidance at your own peril. 26 Inch - Axle-to-crown: 376mm - Offset: 45mm - Steerer: 42–54cm frames = 300mm, 1-1/8" straight - 56–62cm frames = 400mm, 1-1/8" straight - Tire Clearance: 26 x 2.1" (with or without fenders) 700c - Axle-to-crown: 390mm - Offset: 45mm - Steerer: 56–64cm frames = 350mm, 1-1/8" straight - Tire Clearance: 700c x 47mm (with or without fenders)

The Troll Fork is just like the one that comes with the Troll frame, a 26-inch wheeled fully geared utility bruiser and cruiser. Like all Surly's forks, it's constructed of CroMoly steel. It sports removable rim brake pivots as well as a 51mm disc caliper mount. The Troll Fork is designed to accept a rack while using a disc brake, via through-blade threaded mounts in two places on each fork blade, and it's even got fender eyelets. - Disc or rim brake compatible - Compatible with disc brakes and rack simultaneously - Fits 26-inch wheels with clearance for a 3.0-inch tire - Steerer Type: Straight 1-1/8-inch - Sleek powdercoat finish

Classic 100% chromoly construction and engineered for modern accessories, that's Surly's Long Haul Trucker Disc Fork. Its beautiful curved blades are brazed to a lovely and tough investment-cast crown and dropouts. There are disc-brake mounts and eyelets for fenders and mounts for a standard or low-rider rack. Plus, it boasts a tough powdercoat finish that's tres chic. - 100% CroMoly steel construction, curved blades, powdercoated - Extensive mounting options with threaded eyelets in four locations: double eyelet dropouts, mid-blade, and a pair drilled into the fork crown - 51mm IS disc brake mount - 700c has clearance for a 45mm tire

The Machete is purpose-built for slicing trails, with Kwik Toggle compression damping inspired by our renowned Absolute+ technology. Kwik Toggle achieves on/off lockout simplicity in a lightweight, practical package. - TS air spring with in-leg adjustable TPC rebound damping - Kwik-Toggle damper with lockout, adjustable rebound, and high-speed compression - 32mm black anodized stanchions with hollow bore forged aluminum crown - Easily upgradeable to remote using MILO upgrade kit part #314934 - Travel is internally adjustable from 80 to 120mm in 10mm increments - Disc brake only (74mm/6" post-mount) - 27.5x3.0"/29x2.5" maximum tire width

Cross-country purists… we see you. You’re why SID SL Ultimate is the lightest XC fork on the trail. But weight is meaningless without world-class performance and durability. SID SL features a new Charger Race Day 2 Damper with three-position (3P) compression damping—rigid Lock, plush Open, and efficient Pedal positions, on demand for every inch of the race course. FEATURES - Our lightest 32mm chassis ever. World Cup-proven performance, built for your next podium result. - Longer-travel 110mm option, in case you’re feeling extra. - Charger Race Day 2 damper is the lightest damper on the market. This 3P damper features three compression positions: Open, Pedal, or a rock-solid Lock. - Machined crown for lighter weight and greater strength. - Covetable “Blue Crush” signature colorway and Ultimate High Gloss Black, featuring the new lustrous Pearl White graphics package. - Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride. -DebonAir air spring is tuned specifically to meet the demands of XC and maintains a higher ride height for increased confidence and control.

Odyssey's 41-Thermal forks quickly established a reputation for strength and quality when originally introduced in 1999, and they have since gone on to change the standards that all forks are judged by. Features: - Fully redesigned - Laboratory tested and team proven - New, custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance - All-new steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race - New, optimized, 4mm dropout shape for grind and peg clearance - Updated 7075-T6 pre-load bolt, US Pat. No. 7,591,474 - Proven 41-Thermal processed 4130 chromoly - Legendary lifetime replacement warranty Specs: - 25mm steep offset - 3/8-inch axle slots only - 990 brake mounts - Starting at 2lb 2oz (912 grams)

Lugged investment cast crown with cutout in outside tang, long inside tang. Crown drilled for brake. Tange CrMo steel steerer tube and blades. - 1" steerer tube, threadless, 300mm long. - 369mm axle to crown - 38mm and 30mm(only in black) rake. - Lugged crown with Tange Infinity CrMo construction - Threaded models have 50mm of thread - All accept a standard road caliper brake

Trail riders have long had to choose between over-forking for stiffness or under-forking for lower weight. The 36 SL Performance suspension fork takes the new 36 chassis and saves weight at strategic locations, creating a no-compromise lightweight fork for today’s hard-hitting—yet shorter travel—Trail riders. - New generatively designed arch and crown shaping increase torsional stiffness by 20% over 34, while minimizing weight increase - New compliant air spring design reduces chassis friction - New double-butted damper side stanchion sheds grams - Lower Leg Bypass Channels relocated 90° inboard for improved bushing loading and reduced dynamic friction - New easier to operate, low-profile bleeders

When you need to go really big, reach for the 38. The 38 redefines the capability of a long travel single crown fork, setting a new benchmark for confidence, performance, and durability.?Welcome to the big time. FOX's GRIP X2 is the most tunable, supportive, and smoothest descent-focused damper they've created. Riders reap the benefits of sitting higher in the travel while tires stay glued to the ground, cornering with increased traction. It gives you the confidence to push the limits of downhill and enduro racing, all while reducing overall rider fatigue. GRIP X2 is the winning difference. - GRIP X2 is the most tunable, supportive, and smoothest descent-focused damper FOX has created - Riders reap the benefits of sitting higher in the travel while tires stay glued to the ground, cornering with increased traction and experience reduced fatigue - Lower leg bleeders allow atmospheric pressure equalization at the push of a button, and the bypass channels increase volume to alleviate pressure ramping as the fork moves through its travel for better fork performance by increasing small bump sensitivity and responsiveness - The lower leg arch design of the 38 shaves every possible gram while maximizing stiffness and strength requirements of enduro and gravity riding - Fitted with the proven and reliable FLOAT EVOL air spring - Kabolt X axle shaves grams while increasing torsional stiffness via a sleeveless, single-sided pinch bolt design - Kashima Coating on upper tubes for added durability

XC courses are more technical than ever with the latest longer-travel XC bikes more than capable. With a stout full-width stance, increased travel and tire clearance, and svelte sub-1500g weight, the new 34 SL Factory suspension fork is built to exceed the demands of modern XC and downcountry. Features Kashima Coating on upper tubes for added smoothness and durability - Full-width 34mm chassis with aggressive generative design-aided arch and crown for 17% increase in stiffness and 10mm increase in travel over 34 SC, at only 3% weight increase - 20mm increased bushing overlap for reduced friction and greater stiffness with no increase in axle-to-crown length (compared to 34 SC) - Longer air spring than 34 SC with larger negative volume mirrors 34 LT’s supple initial stroke and 34 SC’s supportive mid and end stroke - Double-butted damper side stanchion for weight savings - Lower Leg Bypass Channels relocated 90° inboard for improved bushing loading and reduced dynamic friction

Packed with features to dominate the descents, the 36 answers the call from aggressive all-mountain riders. Available in both trail-focused GRIP X and gravity-focused GRIP X2 damper options. - GRIP X2 is the most tunable, supportive, and smoothest descent-focused damper FOX has created, so riders reap the benefits of sitting higher in the travel while tires stay glued to the ground, cornering with increased traction, and experience reduced fatigue - Generative design-assisted lower leg arch shape increases torsional stiffness by 20%, while reducing overall material - Additional 30mm bushing overlap than the prior model 36, reduces chassis friction, increases stiffness, and boosts performance - New compliant FLOAT EVOL air spring design allows for a slight misalignment under load, reducing chassis friction noticeably - Lower leg bypass channels were relocated 90° inboard to a lower stress area, reducing dynamic friction under bending forces - Double-butted stanchion (on damper side) shaves weight, helping us achieve the goal of zero weight increase - New air spring top cap for easier air volume adjustments, removable with cassette tool (Sold separately) - Redesigned bleeders are sleeker and easier to operate - Kabolt X axle shaves grams while increasing torsional stiffness via a sleeveless, single-sided pinch bolt design - Kashima Coating on upper tubes for added smoothness and durability

Trail riders have long had to choose between over-forking for stiffness or under-forking for lower weight. The 36 SL Factory suspension fork takes the new 36 chassis and saves weight at strategic locations, creating a no-compromise lightweight fork for today’s hard-hitting—yet shorter travel—Trail riders. Features Kashima Coating on upper tubes for added smoothness and durability. - New generatively designed arch and crown shaping increase torsional stiffness by 20% over 34, while minimizing weight increase - New compliant air spring design reduces chassis friction - New double-butted damper side stanchion sheds grams - Lower Leg Bypass Channels relocated 90° inboard for improved bushing loading and reduced dynamic friction - New easier to operate, low-profile bleeders

Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability. - Genuine Kashima Coating on upper tubes - FIT damper and FLOAT EVOL air spring - Low friction seals for improved performance - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment

- Clamps on to dual-Crown fork stanchions to prevent damage to frame - Easy to install and adjust, More secure and lower profile than stock bumpers - Molded loops allow clean and easy zip-Tie number plate mounting - Available for 35mm boxxer or 40mm fox stanchions, Sold in pairs

The MCX Max is a monster cross/gravel carbon fork with clearance to fit 29 x 2.1" tires and 27.5" x 2.25" tires - with practical mud clearance. Extra long 350mm aluminum steerer (Most carbon forks have steerers only 280-300mm long) NOTE: Newer stock will come with a thru-axle bolt instead of a thru-axle with QR cam lever (There are also two lighter MCX models that have straight 1-1/8" steerers and are available in QR or thru-axle. ) – Axle to crown: 406mm – Rake: 50mm – 15mm x 100 thru-axle – Disc brake mount: Flat mount – Internal cable routing – 3-pack mount accessory bosses (3kg capacity per leg) – Single set of fender eyelets – Steerer: Aluminum, 1-1/8"-1-1/2" tapered x 350mm – Weight: 970g (including thru-axle and extra long uncut steerer)

Experience incredible steering precision, small bump sensitivity, and absolute control with the new Onyx 38. A unique E-Designed chassis, wider-than-ever stance, and burly 38mm stanchions launch the Onyx into a new era of MTB Suspension. All new demands require all new thinking. The Onyx D1 38 sets a new standard in E-Designed suspension. What does it mean to be specifically E-Designed? For years, the market has taken “acoustic” suspension and made after-thought upgrades in order to make it “E-Bike Approved”. Bumping up compression damping, using a slightly thicker crown, or just saying “Add 10 PSI” isn’t doing it right. E-Specific design means we thought about these needs from day one. How can we make a fork flex equally as one unit? How can we achieve unreal steering precision without the harshness or deflection? How can we control the fore and aft flex issues the added weight of an e-bike puts on a fork? Questions like these were the foundation, the bones of this concept. After years of engineering, different thinking, and countless hours testing, we nailed it. The final result wasn’t only a fork that met all the requirements and needs of a modern, aggressive E-bike, but it directly translated to a regular bike. NOT ONLY IS THIS THE PINNACLE OF E-BIKE SUSPENSION, IT’S THE NEW STANDARD FOR SUSPENSION. - Burly fork designed for the rigors of E-Bike use, providing steering precision without harshness or deflection - OTT (Off The Top) is an adjustable coil negative spring that allows the rider to dial in initial compliance without affecting the mid and end stroke - The D1 damper features updated high-flow compression and rebound porting to allow a linear suspension dynamic. This initial damping support without any high-speed harshness paired with a 30% increased volume in the Compression Bladder System results in increased small bump sensitivity and damping consistency - High flow linear rebound update increases response without a loss of control or damping - A purpose-built crown increases drop for extra down tube clearance and features a dual hollow bore design with strategically varied wall-thickness for improved stiffness and strength