Skip to main content

Mon - Sat: 10:00am - 6:00pm | Sun: Closed

(406) 830-3195

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Shoes

$450.00
The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you’ll forget you’re wearing it. Leveraging data science, we refined every detail of the S-Works Torch’s upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL biomechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering fit zones to create a disappearing fit on the foot. - Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. *** IMPORTANT FOR WIDE FIT*** the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).
$450.00
The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).
$49.99 $150.00 - $160.00 Up to 69% Off
The 2FO DH Flat is all about going fast and taking chances. Nearly vertical trail? No problem. Mega rock garden? Bring it on. Huge gap jump? Send it. Developed with the help of our world-class DH athletes and three-time reigning DH world champion Loic Bruni, we've built this shoe with the right amount of protection, hold, and style to give you the confidence to get sendy. Last but not least, a new SlipNot ST rubber sole delivers best-in-class pedal grip and connection when things get rowdy. It's the perfect shoe for going fast when the going gets gnarly. - Approximate weight: 395.9 grams - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - Cushioned EVA foam midsole for comfort and impact absorption with shank layer for impact absorption and stability. - Leather and textile upper with added protection keeps you comfortable and is built to last. - Reinforced upper protects and holds the foot to take on the gnarliest terrain with confidence. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - SlipNot ST rubber sole for unsurpassed flat-pedal grip and connection. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time.
$335.00
45NRTH Wölvhammer BOA® winter bike boots make year-round riding possible, with high-tech design and materials that stand up to snow and ice. Get yours here. Most winter boots aren't made for riding bikes — they're too warm in some spots or not warm enough in others, and they're not optimized for pedaling. Wölvhammer BOA® boots are the answer for winter riders. Designed and built for the rigors of real winter riding (deep snow, slippery ice, cold pedals), These winter bike boots are rated for comfort from 0º to 25ºF (-18º to -4ºC), slotting between our Ragnarök and Wølfgar boots. Take on winter rides with Wölvhammer. - Rated for 0º to 25º F / -18º to -4º C comfort - The BOA® Fit System delivers micro-adjustable, precision fit engineered to perform in the toughest conditions - Hook-and-loop upper strap helps secure boot - Removable synthetic liner boot for quick drying - Waterproof breathable membrane to manage moisture - 200 g of Primaloft® insulation - Aerogel insulation underfoot blocks the chill from snow, ice, and cold pedals, and allows for insoles without sacrificing warmth - Non-slip sole for walking on icy surfaces - Compatible with flat and clipless pedals
$49.99 - $119.95 $50.00 - $150.00 Up to 67% Off
The 2FO DH Clip is all about going fast and taking chances. Nearly vertical trail? No problem. Mega rock garden? Bring it on. Huge gap jump? Send it. Developed with the help of our world-class DH athletes and three-time reigning DH world champion Loic Bruni, we've built this shoe with the right amount of protection, hold, and style to give you the confidence to get sendy. Last but not least, a new SlipNot FG rubber sole delivers best-in-class pedal grip and connection when things get rowdy. It's the perfect shoe for going fast when the going gets gnarly. - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - Cushioned EVA foam midsole for comfort. - Extended length cleat slot (4mm) for rearward cleat set up option. - Reinforced upper protects and holds the foot to take on the gnarliest terrain with confidence. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - SlipNot FG rubber sole for confident traction. - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - Synthetic leather upper with added protection keeps you comfortable and is built to last. - Two-bolt cleat pattern fits all major mountain pedals. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time.
$150.00
Don't let cold, damp winter days slow down your riding. The adidas Five Ten Freerider EPS Mid Mountain Bike Shoes are a winter-ready, mid-height version of our classic Freerider shoes. The addition of PrimaLoft® insulation and an insulated, heat-reflective footbed keep feet warm. A coated, weather-resistant leather upper with minimal seams seals out water for dry feet. Their mid-height cuff adds weather-sealing coverage and warmth. A Stealth® S1 Dotty rubber outsole grips wet, slippery ground and your pedals for full control on and off the bike. - Weather-friendly PU Leather for durability and comfort in all conditions - PrimaLoft Gold insulation package to keep your feet warm - Heat-reflective footboard to retain body heat - Rubber cup sole for added durability - Mid-flex midsole balances pedal feel and power output - Stealth S1 Dotty outsole for unbeatable grip
$249.99
Specifically designed for gravel rides and long hours of cycling on terrain full of surprises, the Sidi Gravel shoe offers comfort and stability on road and off. -The Tecno-3 Push System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit -All new proprietary Sidi Wire material that is completely non-binding for intuitive and effortless on-the-fly adjustments -Like most Sidi small parts, the Tecno-3 System is serviceable and replaceable -Polyurethane shock absorber with inner padding designed to protect your feet -The reinforced heel cup that stabilizes and supports the heel. Anatomically shaped plastic, reduces heel slip and provides increased power transfer -Provides additional foot protection in the event of a crash -The Sidi MTB Competition Sole has been specifically designed for gravel biking and can be fitted with two toe spikes on the front for traction in difficult and muddy conditions. Toe spikes are sold separately
$495.00
Step into Wølfgar, the world’s most advanced winter cycling boot. We’ve combined decades of winter cycling experience with NASA-grade insulation materials for a boot that keeps feet warm and dry down to -25ºF. Wølfgar is a boot worthy of singletrack sessions or multi-day expeditions in the harshest winter weather. - Our lightweight three-piece proprietary bottom assembly is compatible with both flat pedals and 2-bolt cleats, and features a rubber outsole with microglass lugs for traction on ice - Waterproof materials and construction keep the elements out, while aerogel under the foot and over the toe block frigid air - On the inside, Wølfgar’s reflective thermal lining retains warmth, and a removable wool and faux-fur liner wicks moisture and insulates
$40.00
Body Geometry Footbeds are ergonomically designed and scientifically tested to increase power, endurance, and comfort by optimizing hip, knee, and foot alignment. With three different arch support options (Red+ being the lowest, Blue++ being in the middle, and Green+++ being tallest), you can be sure that every precious watt is preserved through the pedal stroke. - Body Geometry Footbeds measurably increase power, reduce time to exhaustion, and reduce injury by aligning hip, knee, and foot. - Customized longitudinal arch and metatarsal support with Red+, Blue++, or Green+++ contour. - Proprietary lightweight foam avoids taking a compression set for long-lasting performance. - Combine Body Geometry shoes, footbeds, and wedges to maximize performance benefits.
$325.00
Originating from the conceptual standpoint of a mountaineering boot, the new and evolved Wölvhammer is lighter, more comfortable, and grippier. The overhauled design features a removable synthetic liner and a three-piece proprietary bottom assembly compatible with flat and clipless pedals. When the cold winter creeps in, Wölvhammer has you covered. - Removable synthetic liner boot for quick drying - 3-piece proprietary bottom assembly is lighter, warmer offers more walking traction - Aerogel insulation blocks cold cleats and allows use of preferred insoles without sacrificing warmth - 0 to 25F / -18 to -4C Comfort
$21.99
96% Nylon, 4% Lycra The original DeFeet shoe cover is designed to be worn over road cycling shoes with cleat systems, providing an extra barrier against windchill and dirt. A three-season product for cool to cold conditions in damp or dry weather, Slipstreams feature a knit-in cleat guide to cut your own opening.
$351.99
The Garneau Klondike M3 Cycling Boot offers ultimate protection and keeps feet warm on long winter rides. - High volume fit last - Cordura 1680D with 400 g ThinsulateTM to resist cold temperatures down to -20°C/-4°F - Boa® IP1 with silicone elastic and neoprene opening with YKK zip - VIBRAM® DURATREK outsole - 3-layer construction insole with felt, 3 mm PE and foil
$18.00
- Made from wind and waterproof latex to keep your feet warm and dry - Lightweight and flexible no need for zippers or Velcro that cause leakage - Smooth form fitting design aids in aerodynamic efficiency - Easily fits into jersey pocket or saddle bag
$29.00
- Windproof and waterproof materials keep your feet warm on cool morning or winter rides - Designed for temperatures down to 20 degrees in dry weather and 60 degrees in wet weather - Fastens easily with a snap under your shoe
$39.99
For top comfort, Planet Bike's Blitzen Shoe Covers are made of windproof fabric lined with microfleece to keep you warm. They boast Velcro closures for easy on/off and reflective accents for safety.
$34.99
Planet Bike's Comet Shoe Covers are made of neoprene for excellent water and wind resistance and warmth. Plus they have Velcro closures for easy on/off and reflective accents for safety.
$90.00
Having a go-to wardrobe that can deal with the worst weather is key when you have to get out and ride in all seasons. Keeping your feet warm and dry will make your commute or foul weather ride easier and more comfortable. - Open soles framed by abrasion resistant material - Ideal to wear with cycling and leisure shoes - Lightweight material for easy storage - GORE-TEX Product: durably waterproof, windproof and extremely breathable - Reflective details at front, back and side - Reflective transfer print to mark right and left - Back Velcro width adjustment
$49.95
- More performance - Less discomfort - Better power transmission Full speed ahead – optimize your performance to the pedals! The IP Pro Solestar ergonomically stabilizes your foot on road and mountain bikes, supports efficient and comfortable movement, maximizes leg power and reduces discomfort. The IP Pro Solestar was developed with internationally renowned insole specialist Solestar.
$119.99
No matter if your feet are thin, medium, or wide, Garneau's X-comfort zone technology prevents numbness by extending the shoe's edges if needed. A rigid fiberglass-nylon outsole ensures all your legs' power goes into those pedals while a complete rubber cover makes for a perfect grip in any situation. The T-Flex technology zone provides flexibility to the front of the outsole, making the Gravel II a perfect multi-activity shoe. You can head to the gym, for a walk, or a bike ride without worrying about foot pressure or blisters. Technical Details: - Shoe Technology: X-Comfort Zone - Shoes Weight: 12.9oz / 365g (size 42) - Outsole: T-FLEX rubber outsole with fiberglass/nylon - Insole: Regular EVA insole - Closure System: 3 offset hook-and-loop straps
$49.95
- More performance - More comfort - Also suitable for walking Misalignment of the feet can significantly limit the enjoyment of cycling. With the IP Touring Solestar, Ergon offers all touring riders a significant gain in comfort, especially when covering longer distances. The patented stabilization delta keeps the foot in an ergonomic position, prevents discomfort and optimally transfers leg power to the pedal. Efficiency is maximized with a grippy surface made of nylon fabric. Finely ground walnut shells in the 3D foam padding aid in a keeping the feet cool. The insole shell, made of fiberglass composite, enhances pedaling efficiency. The IP Touring Solestar was developed with the internationally renowned insole specialist Solestar.
$169.00
Bont Riot+ , the world's first carbon-composite, heat-moldable, entry-level cycling shoe now available with BOA retention system. The Riot+ combines Bont's pro series technical features, our power transfer platform, anatomical shaping with competition grade materials and BOA retention system to create the most technically advanced entry level road cycling shoe. - Model: Riot+ - Material: Carbon Composite Construction with Microfiber Upper - Stack Height: 4.8 mm - Air Vents: Ventilations holes through upper and mesh inserts - Innersole: Comfort - Sole Guards: Replaceable - Cleat Mounting: 3 Hole Look Configuration - Closing Options: Boa dial and Z from Velcro strap - Weight: 280 grams
$120.99
No matter if your feet are thin, medium or wide, Garneau's unique X-Comfort zone technology prevents numbness by extending the shoe's edges if needed. A breathable and ventilated outsole takes care of your feet, while a rigid fiberglass nylon outsole ensures all your legs' power goes into those pedals. The Chrome II fits both the SPD system or standard road bike pedals, and front and back reflective accents make sure you're being seen anytime you ride. Technical Details - Technology: STANDARD FIT: Roomier fit offers more comfort for all-day riding - Synthetic leather - Weight: 8.3oz / 236g (size 38) - Outsole: Patented Ergo Air injected nylon/fiberglass; extremely ventilated - Insole: Breathable, ventilated - Heel Retention: HRS-80: Maintains heel positioning and comfort - Closure System: 3 offset hook-and-loop straps
$399.99
Technical Details: - Racer Fit for snug upper - Bounded upper all seamless for comfort to prevent pressure points - Integrated double X-Comfort Zone for a large range of feet width - BOA Li2, a new mechanism that generates higher power with finer resolution - PowerZone Technology for better ankle support and stability - Lace system with 4 independent adjustment zone to maximized comfort during long rides - 100% Carbon sole with Patented Air Chanel for constant airflow to prevent fatigue and numbness - 3D insoles with 3 adjustable arches for a custom fit - 7.9oz / 225g (size 42)
$299.99
No matter if your feet are thin, medium or wide, Garneau's X-Comfort zone technology prevents numbness by extending the shoe's edges if needed. Having an internal lace system and a tight opening on the shoe's top avoids mud from sticking into the Baryum's fastening system. Get the best of both worlds with a stiff carbon outsole covered in rubber for optimal grip in any conditions. Heels and toes are protected with extra reinforcements so that you can head to the craziest trail sections with confidence. Technical Details - Shoe Technology: Dual X-Comfort Zone and Power Zone technologies - Shoes Weight: 12.7oz / 360g (size 42) - Outsole: Carbon and rubber outsole - Insole: Ventilated IceFil Transfo 3D insole with 3 adjustable arches - Heel Retention: HRS-100 reinforced with 0.6mm membrane: Better heel positioning and reduced loss of power - Closure System: Boa L6 micro-adjustment
$339.00
- Model: Vaypor XC - Material: Carbon Composite chassis with Durolite Upper & Faux Seude Leather Liner - Stack Height: 4.4 mm - Air Vents: Frontal area air vents - Innersole: EVA thermo-moldable - Sole Guards: Replaceable - Padding: Memory Foam - Cleat Mounting: MM grid plus grip / SPD compatible - Fit Customization: Fully Heat Moldable Chassis utilizing Epoxy Thermoset Resin - Closing Options: Z form Velcro Straps + Boa dial (replaceable) - Weight: 385 grams - Color Options: Black only
$142.99
Whether you ride with an SPD system or standard road bike pedals, the Tri X-Speed IV fits them both. No matter if your feet are thin, medium or wide, Garneau's X-Comfort Zone technology prevents numbness by extending the shoe's edges if needed. A wide foot entry makes it easy to perform those first hop-on-the-bike transitions, and 2 hook-and-loop straps help to attach your feet and start pedaling in no time. A breathable and ventilated insole takes care of getting your feet dry after the swim and keeping them that way until you hit the run, on your way to reaching your triathlon goals. Technical Details - Shoe Technology: X-Comfort Zone - Shoes Weight: 8.8oz / 250g (size 42) - Outsole: Patented Ergo Air injected nylon/fiberglass; extremely ventilated - Insole: Breathable, ventilated - Heel Retention: HRS-80: Maintains heel positioning and comfort - Closure System: Double hook-and-loop straps for easy transitions
$99.99
As the name says, it’s a city shoe. Here’s a great high-tech and versatile product with great features that you can also wear to go for a coffee or groceries. You will barely feel the elastic tongue on your foot. Make a smart choice. Go for comfort and quality. Our patented T-Flex outer sole was designed for you to be able to walk everywhere you want after the ride. You won’t believe how comfortable you are while semi-floating on our technical foam... - Technology : Integrated X-Comfort Zone technology with better stretch - Easy slip on and breathable for great comfort - Outsole: New T-FLEX rubber sole: Adapted for any surface and provides good traction - Insole: Regular EVA insole - Cleats: SPD compatible with 2 bolt
$65.00
Moisture management is one of the most important elements of winter cycling and can make or break a ride. On long rides in extreme conditions, having a spare pair of 45NRTH's Wølfgar boot liners means you can ride confidently knowing that you have a dry, fresh pair when you need it. Constructed with a wool/polyester blend for durability, Wølfgar's liner boot wicks moisture away from your skin while still maintaining its insulation value to keep your feet dry and comfortable. Hook-and-loop on the heel secures the liner inside the shell boot. For use with 45NRTH Wølfgar boots only (sold separately)
$245.00
Ragnarök Tall is the remedy for cool and wet conditions. Our shoulder-season performance shoe features a waterproof membrane and tall neoprene cuff to regulate moisture and keep out mud and grit. End uncomfortable rides with Ragnarök’s unrivaled weather protection. - A redesigned opening makes Ragnarök easy to put on and take off, and a floating three-finger overflap allows riders to dial in the perfect fit - Ragnarök’s real rubber outsole has an aggressive tread for walking in mud and features a 2-bolt cleat mount - Tall neoprene cuff keeps debris out - Easy on and off - Floating three-finger overflap allows the BOA laces to tighten where they need to for an optimal fit - Imported
$129.99
The Stamp flat shoe does it all, whether on street or trail. The outsole is optimized for Crankbrothers Stamp pedal body, though it is designed to work flawlessly with any flat pedal. Its high-friction rubber compound provides optimal grip and its lug depth absorbs the pins to ensure a secure pedal connection. - Closure System: Classic lace closure system offers smooth closure with round laces and a pocket to safely tuck laces. - Match Compound: Our flat rubber compound (MC2) is optimized for grip and durability. It has high-friction to stick to the pedal body and low rebound properties to dampen vibrations. The lugs are rounded to resist abrasion. - Match Outsole: The tread pattern is designed for traction off the bike. Directionally angled and spaced toe and heel lugs offer traction for hiking up or down steep terrain. The ramped toe provides walkability on steep terrain. - Match System: The tread pattern is designed for maximum contact surface and compatibility with the pedal platform. In addition, the lug depth is designed around pin dimensions to absorb the pin body. Upper Features: - Closure system - Hidden eyelets - Lace pocket - Perforated toe - Mesh windows - Perforated tongue - Reinforced toe - Padded tongue - Heel dots
$160.00
Clipless-compatible mountain biking shoes for gravity-fueled riding. Seek out epic new descents or muscle through rough terrain. These adidas Five Ten Hellcat Mountain Bike Shoes provide all-conditions comfort and precision geared towards enduro and downhill rides. They're wide and stiff enough to give a controlled-pedal feel plus durable and impact-resistant. Riding clipless or flat, they offer the grip to power down your line. This product is made with recycled content as part of our ambition to end plastic waste. 20% of pieces used to make the upper are made with minimum 50% recycled content. SPECIFICATIONS - Regular fit - Lace and hook-and-loop closures - Coated leather upper - Molded sockliner - Stealth Marathon rubber outsole - Clipless-compatible - Imported
$180.00
The pinnacle model within the Freerider family, the Freerider Pro VCS Mid includes upgraded features, including D30 ankle protection and a PRIMEKNIT ankle cuff to keep debris out. This shoe is for the all-mountain rider looking for added protection, quick-drying materials and unbeatable grip to keep them going over any trail. - Synthetic upper with impact resistant toe box for protection from trail hazards - Compression-molded EVA midsole balances pedal feel and power output - Hook-and-loop closure straps - D30 inner ankle protection - Primeknit ankle cuff keeps out unwanted debris from the trail - Stealth S1 dotty rubber outsole for unbeatable grip
$120.00
Trust the link between shoe and pedal. These adidas mountain bike shoes have a non-marking Stealth® Phantom Dotty rubber outsole for control where you need it most. The canvas upper supports your feet through long and technical rides. The lightweight and flexible midsole delivers cushioning before, during and after the ride. - Stealth Phantom rubber offers high-friction grip and non-marking utility on and off the bike. - The dotty rubber outsole offers unbeatable grip in wet or slippery conditions. - A mix of materials provides uncompromised durability and support.
$69.99
Warm neoprene bootie that protects your feet in very cold and wet conditions. All seams are covered with waterproof tape on the inside for optimal weather protection. The bootie also features Velcro adjuster at top, reinforcements at bottom and water-repellent zipper.
$499.99
Engineered specifically for athletes who seek maximum foot stability when unleashing extreme power. Ventilated carbon sole with innovative Firmor Closure lateral support system suitable for athletes who need to combine power transfer with greater lateral foot stability. The specially designed dual-rotor closure offers the ultimate adjustment for the perfect level of lateral stability. -The Single Tecno-3 system creates a perfect tension balance between the shoe's internal and external side, and guarantees an excellent closure adapting to every instep -The Adjustable Heel Retention Device reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider's heel -The heel retention device tightens the top of the heel cup so that the heel is secured during steep climbs and sprints, each side of the heel can be adjusted independently for a perfect fit -Oval holes extend the adjustment position of the cleat by ± 5 mm and a millimeter scale is included for determine the riders personal cleat position -For walkability, Sidi cycling shoes include a replaceable polyurethane heel pad. Wire's heel pad has a new design and it is very light -The Vent Carbon Sole is designed with an integrated vent and air channels for heat dissipation and air flow. The vent can be opened or closed for 4-season comfort -The women's specific fit is narrower across the ball of the foot and features less volume inn the instep area and a narrower heel cup
$130.00
Do-it-all flat pedal mountain bike shoes. Classic flat pedal performance. These adidas Five Ten Freerider DLX Mountain Bike Shoes offer the same legendary flat pedal control as the Freerider. The synthetic and coated leather upper raises the bar for style, durability, and weather resistance. Stealth S1 rubber and a Dotty tread keep your feet firmly planted on the pedals. Ride, hang out, and ride some more. SPECIFICATIONS - Lace closure - Synthetic and coated leather upper - One-piece molded cupsole - Stealth S1 Dotty rubber outsole - Imported
$109.99
Great for riding with or without clipless pedals, the Urban shoe is comfortable and flexible both on and off the bike. It's the perfect style for the cyclist who wants to enjoy a nice ride yet be able to stop for some extra activities along the way. You no longer need two different pairs of shoes to do some sightseeing, take a walk in a nature trail or simply to fully enjoy the day. Technical Details - Shoe Technology: New T-FLEX rubber facilitates walking and prevents heel pressure - Regular EVA for comfort - STANDARD FIT: Roomier fit offers more comfort for all-day riding - Shoes Weight: 10.4oz / 295g (size 38) - Upper: PU leather and mesh for comfort and breathability - Outsole: Rubber T-FLEX for easy walking: Prevents heel pressure - Insole: EVA single density: Enhances comfort - Heel Retention: HRS-80: Maintains heel positioning and comfort - Closure System: Laces - Cleats: SPD cleats fit all major MTB pedals, cleats aren't included with the shoes.
$140.00
Lightweight adventure biking shoes. Ride. Eat. Sleep. Repeat. Bikepacking is synonymous with adventure. The Five Ten Trailcross LT Mountain Bike Shoes scramble over rocky terrain and kick it at camp just as well as they grip pedals. Light, breathable, and comfortable enough for all-day wear, you've found the do-it-all adventure bike shoe for the road less traveled. SPECIFICATIONS - Regular fit - Lace closure - Breathable mesh upper - Lightweight, durable feel - Lightweight biking and hiking shoes - EVA midsole - Non-Marking Stealth Phantom Dotty rubber outsole - Imported
$160.00
Flat-pedal mountain bike shoes for gravity and enduro riding. Choose your line and let it roll. The adidas Five Ten Impact Pro shoes set the standard for flat-pedal mountain bike control. Pedal-gripping tread and a wide, stiff platform support aggressive enduro and gravity riding. Go ahead and send it. PEDAL-GRIPPING CONTROL Stealth S1 rubber provides unmatched pedal grip. WIDE, STIFF PLATFORM Reinforced midsole provides a stiff platform for aggressive riding. IMPACT RESISTANT PORON reinforced toe box adds impact resistance. SPECIFICATIONS - Lace closure - Quick-dry synthetic upper with reinforced toe box - Stiff, supportive feel - Gravity-minded mountain biking shoes - Compression-molded PU midsole - Stealth S1 rubber outsole - Imported
$274.99
Good for the mud, good for stones, the Garneau Mudstone shoes have a flat outsole that's great for riding and walking around the trails, with a recessed insert that's compatible with all styles of SPD cleats. Great for Mountain Biking, Fat Biking, or any conditions when water and cold are present. The Mudstone Shoes have an extra insulated toe box with a high volume fit last, so you can wear thick socks without having to size up. They're fully waterproof with a three-layer construction using synthetic leather and a neoprene sealed cuff for better protection. BOA IP1 dial is easy to adjust while riding with gloves, and the Ergo Grip II outsole provides excellent traction in wet walking conditions. - Shoe Technology: "EEE" last specially designed for a higher volume, perfect for wearing thicker socks in cold temperatures - Closure with reversed hook and loop strap allows for fast transitions - Ergo Grip 2 outsole with removable studs provides excellent traction for walking and configured to maximize mud clearing - 3 layer construction with felt, 3mm PE, and foil to block the cold from the outsole - Boa IP1-S two-way micro-adjustment for easy replacement with hook and loop strap - Front opening with sealed zip prevents infiltrations - 435g (size 42) - SPD cleats fit all major MTB pedals - Cleats sold separately
$161.99
On gravel, style is a state of mind. The new S-Works Recon Lace will put a smile on your face and style in your pace every time you head out the door. A timeless look combined with tried and true Body Geometry features and the performance and durability that have become hallmarks of S-Works Recon shoes. Plus, you’ll leave everyone in the group asking, "What shoes are those?" - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency; optimize hip, knee, and foot alignment; and reduce injury risks. - Our stiffest and lightest XC FACT carbon plate maximizes power transfer: Stiffness Index 13.0. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Titanium alloy cleat nut. - SlipNot rubber heel and toe tread for confident traction on all terrain with removable toe studs. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Two-bolt cleat pattern fits all major MTB pedals.
$49.99 $150.00 67% Off
The 2FO DH Clip is all about going fast and taking chances. Nearly vertical trail? No problem. Mega rock garden? Bring it on. Huge gap jump? Send it. Developed with the help of our world-class DH athletes and three-time reigning DH world champion Loic Bruni, we've built this shoe with the right amount of protection, hold, and style to give you the confidence to get sendy. Last but not least, a new SlipNot FG rubber sole delivers best-in-class pedal grip and connection when things get rowdy. It's the perfect shoe for going fast when the going gets gnarly. - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - Reinforced upper protects and holds the foot to take on the gnarliest terrain with confidence. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - SlipNot FG rubber sole for confident traction. - Extended length cleat slot (4mm) for rearward cleat set up option. - Synthetic leather upper with added protection keeps you comfortable and is built to last. - Cushioned EVA foam midsole for comfort. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - Two-bolt cleat pattern fits all major mountain pedals. - Approximate weight: 395.9 grams
$200.00
The Trailcross range was built from the ground up, starting with the Five Ten dotted outsole with the addition of a recessed cleat to clip into compatible pedals. This was then refined with hiking in mind, bringing the additional ridged grip to the toe and heel. The Trailcross Clip-In is a lightweight and breathable shoe. With the need for the shoe to provide all-day comfort but also deliver across the contact points on and off the bike, the mid-sole EVA technology provides the necessary toe flex for hiking, without losing the all-important stiffness. The Trailcross Clip-In utilizes a hook and loop closure for added security and to reduce heel lift. Clip-in pedal users no longer need to compromise when planning their next adventure.
$230.00
Push your limits in the great outdoors. These women's Five Ten biking shoes feature the BOA® Fit System for a custom fit. Seamless overlays offer abrasion resistance through rough terrain. The clipless shank is compatible with all mountain bikes. Made with a series of recycled materials, this upper features at least 50% recycled content. - Micro-adjustable dial-based BOA® Fit System plus hook-and-loop straps - Synthetic upper with seamless overlays - Non-slip heel cup - Clipless shank - Impact-resistant toe box
$299.99
The Sidi technology used for mountain biking is applied to the gravel discipline. The Sidi Dust Shoelace is a rigid high performance shoe with a tried and true closure design, technologically advanced and reliable. -The newly designed integrated heel cup is light weight and reinforced to avoid deformations after prolonged and strenuous use -Upper part of the toe section is rubberized to resist and deflect impacts from stones or debris when cycling -The Sidi MTB SR17 sole represents the ideal balance of stiffness for efficient power transfer and flexibility for walking -The toe inserts are easily replaceable and offers the possibility to mount spikes for particularly muddy rides
$80.00
Get dual performance with these transitional mountain bike shoes. Designed to grip the pedals, they have a weather-resistant suede upper for soft comfort. The skate shoe design is padded for comfort, yet lightweight for all-day rides and walks around town. - One-piece molded rubber cupsole - Non-marking, high-friction Stealth Phantom rubber outsole - Micro Dotty tread - Weight per shoe: 326g (based on Men's Size 9)
$80.00 - $90.00
Bike Shoes You Can Wear All Day, Every Day Ride to work. Walk to class. Kick it on the weekend. The Five Ten Sleuth Bike Shoes let you flow comfortably between work, school and the bike or coffee shop. Their pedal-gripping rubber tread means excellent flat pedal control, and their low-profile style makes them your do-it-all shoes. - Regular fit - Lace closure - Leather upper - Biking shoes with street style - Shock-absorbing EVA midsole - Non-marking Stealth Marathon Classic-Dotty outsole - Imported
$79.99
If you're looking for one shoe cover to provide the most warmth for the harshest of conditions, then look no further. Good news! Your search for the perfect foul weather shoe cover is over! Introducing the Garneau Thermal H2O Shoe Covers (some minor "assembly" required). This seam-sealed, 3mm super stretch neoprene, fleece-lined shoe cover is 100% wind and waterproof, and will keep your toes warm in the nastiest of weather! Its outsole is made out of rubber for additional traction, and can be cut to fit whatever type of cleat you have using the integrated cutting guide. We round it out with a seam-sealed zipper that tucks into a zipper garage and hits of reflectivity that offer additional visibility in low light conditions. Technical Details - Under Sole: Durable pre-cut rubber sole for better water resistance - Opening: Sean-sealed zipper for all weather conditions - Shoe Cover Fabric: super stretch neoprene laminated with fleece
$50.00 - $120.00
If you're looking for a versatile MTB shoe that can transition from hot laps in the park to cold beers at the base without missing a step, then look no further. The 2FO Roost Flat brings a casual, relaxed vibe with all the right DNA to get sendy on the bike. It combines a durable leather and textile upper, cushioned EVA foam midsole and relaxed fit last that can stand up to the rigors of daily trail use without sacrificing off-the-bike comfort and style. Last but not least, a new SlipNot ST rubber sole delivers unsurpassed flat-pedal grip and connection when things get rowdy. - Approximate weight: 360g (1/2 pair, Size 42). - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Cushioned EVA foam midsole for comfort and impact absorption. - Leather and textile upper with added protection keeps you comfortable and is built to last. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - SlipNot ST rubber sole for unsurpassed flat-pedal grip and connection.
$150.00
Transfer maximum power to the pedals on the trail. These all-weather mountain biking shoes have a clipless style that's compatible with all clipless mountain bike pedals. A carbon-infused nylon shank adds to the stiff build. The Stealth C4 rubber outsole provides exceptional grip on and off the bike. - Lace closure with hook-and-loop top strap - Synthetic weather-resistant micro-perforated upper - Perforated EVA tongue with mesh overlay - Stealth C4 rubber outsole for unbeatable grip - Durable lightweight EVA midsole - Clipless style - Stiff carbon-infused nylon shank - Regular fit - Textile lining
$150.00
Transfer maximum power to the pedals. These all-weather mountain biking shoes have a clipless style that's compatible with all clipless mountain bike pedals. A carbon-infused nylon shank adds to the stiff build. The Stealth C4 rubber outsole provides exceptional grip on and off the bike. - Lace closure with hook-and-loop top strap - Synthetic weather-resistant micro-perforated upper - Perforated EVA tongue with mesh overlay - Stealth C4 rubber outsole for unbeatable grip - Durable lightweight EVA midsole - Clipless style - Stiff carbon-infused nylon shank - Regular fit - Textile lining
$110.00
The adidas Five Ten Freerider Canvas Mountain Bike Shoes are as street friendly as they are capable on the bike. A Dotty tread with Stealth S1 rubber sets you up for flat pedal control and bike-worthy durability sets you up for the trail. All with a fit and feel that sets the bar for versatile wear on and off the bike. - Lace closure - Yarn in upper contains at least 50% Parley Ocean Plastic and 50% recycled polyester - Canvas upper - Textile lining - Reinforced toe - Stealth S1 rubber outsole
$120.00
Pedal-gripping utility and elevated everyday style. Equal parts high-performance bike shoes and everyday trainers, the Five Ten Sleuth DLX Mountain Bike Shoes let you flow between rides, school, work or the coffee shop with all-around laid-back style. Genuine flat pedal control meets a do-it-all look with Stealth Phantom Rubber and a Dotty tread outsole. - Stealth Phantom offers unbeatable grip and non-marking utility - Dotty tread for optimal pedal control
$524.99
Designed for our professional athletes, the Sidi Shot 2S is crafted to deliver optimal power transfer while ensuring the utmost comfort, enabling athletes to stay focused on the road. Its carbon C-Boost sole harnesses the full strength of woven fibers, while the upper is constructed using Bioveg material derived from recycled microfibers and finished with an external plant-based coating. The innovative closure system is strategically positioned away from other riders, enhancing maneuverability in crowded situations. The adjustable heel retention mechanism allows you to secure the heel of the shoe, tightening the heel so that it conforms to any riders' heel shape. - The Tecno-3 Push Flex closure reduces the pressure zone on the instep and significantly improves the comfort of the closure  - The Adjustable Heel Retention Device reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider's heel - The heel retention device tightens the top of the heel cup so that the heel is secured during steep climbs and sprints. Each side of the heel can be adjusted independently for a perfect fit - The all new Sidi integrated heel cup is reinforced to avoid deformation after prolonged efforts and extreme pressure. Anatomically shaped, it stabilizes and supports the foot while pedaling - The C-BOOST SRS Sole is made of the latest generation carbon, designed to conform to the metatarsal area, increasing the transmission of power directly to the pedals, guaranteeing ideal power transfer and support - Oval holes extend the adjustment position of the cleat by ± 5 mm and a millimeter scale is included for determining the riders personal cleat position - Provided with SRS (Sole Replacement System) inserts in Nylon and TPU, with the function of protecting the carbon in the areas most subject to deterioration from use and for increased durability while walking - The SRS inserts are integrated with ventilation holes that promote the circulation of air inside the sole with each pedal stroke
$70.00
For a little extra protection in the cold for your toes, slip on a pair of the Element Shoe Covers—they're the perfect winter accessory to ensure your feet stay warm and dry. - Soft Shell fabric provides resistance to both wind and water, without sacrificing anything to breathability, comfort, or layering ability. - Rear zipper closure securely blocks the elements from infiltrating the covers, while also easing entry and exit. - Abrasion-resistant bottom and toe panels increase the covers' lifespan. - Universal cleat opening means that the covers are compatible with both road and mountain shoes. - Reflective elements increase your visibility to motorists in low-light conditions. - Fabric Content: MAIN: 44% Polyester, 38% Nylon, 14% Elastane, 4% PU; TOE & HEEL: 100% Polyester
$84.95 - $160.00
Built for high-alpine terrain, the Rime 2.0 brings rugged capability to ensure you can conquer any mountain trail. XPEL mesh lining sheds while you shred, preventing the shoe from becoming water-logged in creek crossings and will dry overnight. Our Lollipop midsole construction is paired with a gnarly Vibram rubber outsole creating superb/unmatched off-bike push-ability for getting over any unrideable terrain. For closure, a standard lace is paired with an L6 Boa for a precise fit, on-bike adjustability, and redundancy to keep you riding when you're in the backcountry. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Landing Strip cleat pocket is optimized for effortless foot-out riding style with platform clip pedals. - Boa L6-Snap dials for easy adjustment, backed by the Boa Lifetime Guarantee - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - Vibram rubber sole for confident traction - Relaxed Fit for a balance of pedal feel and off-bike comfort - Two-bolt cleat pattern fits all major mountain pedals. - Approximate weight: 384g (1/2 pair, size 42)
$150.00
The Comp Mountain Bike shoes take a whole lot of comfort, mix it with some serious pedaling efficiency, and add a layer of grippy trail traction for good measure. The result is a feature-packed and reliable all mountain shoe that delivers the right mix of performance and durability for a variety of trail conditions. Designed with Body Geometry attributes at the forefront, the comfortable fit and stiff sole provide maximum pedal efficiency and power transfer. The Boa S2-SV dial, meanwhile, is easily replaceable without using any tools, and it allows for on-the-fly fit adjustments. The materials used in the construction are also designed to take a beating, whether it be an accidental root or rock strike, while the SlipNot tread gives you reliable trail traction when you need it. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Injection-molded nylon composite outsole with SlipNot rubber tread for moderate pedaling stiffness and phenomenal trail traction: Stiffness Index 6.0. - Single Boa S2-SV dial for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee. - Dial & lace assembly is replaceable in seconds with Snap cartridge system. - Hard-molded toe kick for protection and durability. - Stitched synthetic and mesh upper with asymmetric strap closure for a comfortable fit. - Two-bolt SPD-style cleat pattern fits all major MTB pedals. - Standard Fit last for all-day comfort. - Replaceable toe studs. - Multiple widths available. - Approximate weight: 365g (1/2 pair, Size 42)
$120.00
Take the performance and Body Geometry ergonomics of our high-end road shoes, put them in an affordable design, and you basically have the Torch 1.0 Road shoes. For the closure, we added a single lightweight Boa L6 dial that features tool-free snap replacement capability, while also providing simple, on-the-fly micro-adjustments. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - With a 6.0 Stiffness index, the injection-molded nylon composite sole is engineered to be moderately stiff and plenty light. - Lightweight Boa L6 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - Synthetic upper with for supple feel over the foot. - Reflective heel elements increase your visibility to motorists in low-light conditions. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 290g (1/2 pair, Size 42)
$49.99 $150.00 67% Off
The 2FO DH Flat is all about going fast and taking chances. Nearly vertical trail? No problem. Mega rock garden? Bring it on. Huge gap jump? Send it. Developed with the help of our world-class DH athletes and three-time reigning DH world champion Loic Bruni, we've built this shoe with the right amount of protection, hold, and style to give you the confidence to get sendy. Last but not least, a new SlipNot ST rubber sole delivers best-in-class pedal grip and connection when things get rowdy. It's the perfect shoe for going fast when the going gets gnarly. - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - Reinforced upper protects and holds the foot to take on the gnarliest terrain with confidence. - SlipNot ST rubber sole for unsurpassed flat-pedal grip and connection. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Leather and textile upper with added protection keeps you comfortable and is built to last. - Cushioned EVA foam midsole for comfort and impact absorption with shank layer for impact absorption and stability. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - Approximate weight: 395.9 grams
$49.99 $120.00 58% Off
If you’re looking for a versatile MTB shoe that can transition from hot laps in the park to cold beers at the base without missing a step, then look no further. The 2FO Roost Clip brings a casual, relaxed vibe with all the right DNA to get sendy on the bike. It combines a durable leather and textile upper, cushioned EVA foam midsole and relaxed fit last that can stand up to the rigors of daily trail use without sacrificing off-the-bike comfort and style. Last but not least, a SlipNot FG rubber sole delivers confident traction on and off the trail. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - SlipNot FG rubber sole for confident traction. - Extended length cleat slot (4mm) for rearward cleat set up option. - Synthetic leather upper conforms to the foot and is built to last. - Cushioned EVA foam midsole for comfort - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - Two-bolt cleat pattern fits all major mountain pedals. - Approximate weight: 367g (1/2 pair, Size 42)
Page 1 of 4 Next page