Winter Riding Essentials
When you ride in frigid conditions, your options for lightweight insulation under your outerwear are limited. It's typically been a fleece jersey with rear pockets that only adds to bulk and weight. Insulation with a high warmth to weight ratio, like down feathers or polyester fiber-fill are ideal, but those materials need to be encapsulated with a coated fabric to contain them, cutting breathability down to zero. Our solution is Polartec Alpha insulation that provides insulation without the need to encapsulate, giving you unimpeded breathability for a warm, dry ride. The outer shell is lightweight and uncoated, furthering the flow of perspiration and allowing the piece to packable when you need to de-layer when things get too hot. The jacket is designed to be worn under an outer jacket, such as our Deflect H2O pieces, so the fit is close to the body to eliminate any bulk. An under-the-helmet hood provides an added wind layer and traps heat in where you lose it, at the top of your head, and we finish off the neck and wrists with reflective binding for visibility in case you're caught out after sundown. - Woven outer shell with 90g Polartec Alpha breathable insulation combines to create a packable and warming insulation piece. - A non-insulated hood is intended to be used under the helmet to keep the wind at bay and to trap heat on cold rides. - Two front hand pockets keep your hands warm off the bike and provide room for your small essentials and electronics. - Inside pockets are perfect to store a hat or gloves when things start to heat up. - Edge binding at the wrists and collar seal in warmth and feature reflective tape woven-in for increased visibility to motorists in low-light conditions. - Deflect UV 50+ protects against harmful UV rays. - The fit is close to the body for layering under outerwear. For a looser, "street fit," we recommend one size up. - Shell fabric weight: 48g
Keep the road grime and water off your clothes with a durable fender set made specifically for the Roll. No-fuss installation means you can add them quickly and easily, so you're always ready to ride. - Valuable and durable plastic fender set for Roll. - Designed for 650b x 2.3" tires. - Stainless steel fender stays and hardware. - Rear fender supports Plug and Play frame mounting. - Front: 660mm / Rear: 1050mm
The Shockblade 26/27.5-inch is a clip on front, high-quality 2-component fender for mounting on the fork of 26-inch and 27.5-inch mountain and trekking bikes. - Virtually unbreakable high quality dual compound plastic - Hidden chuck cone adapter which is fitted once during first assembly - Easy quick-release fastening - Optimized dirt protection - Fits almost all suspension forks - 26-inch and 27.5-inch wheel compatible
The Vis 180 series redefined tail lights as the safest, most reliable platform available. The Vis 180 Pro continues this tradition by offering the brightest tail light on the market with a piercing 150 lumens of output. With a wide spread of red rear lighting combined with Light & Motion exclusive amber side lights for increased visibility at intersections, the Vis 180 Pro is the essential tail light for commuters. Featuring: - 150 Lumen output certified to the FL-1 Standard - Engineered with the highest-level CREE LED and enhanced firmware - Dual LED array to maximize visibility - Ultralight Aluminum body - Accurate battery charge and status indicator with 4 status levels - Custom engineered reflectors and optical solutions optimize the light to distribute red and amber light a full 180 degrees - Secondary LED spreads amber light for 180 degrees of visibility - Simple ratchet in/out adjustability - Slide lock system allows you to easily take on / off without tools - Integrated clip for attaching to backpack or messenger bag; - Bike rack mount available and sold separately - Micro USB Rechargeable (Fully charges in 5 hours) - Low battery warning and auto shut-off to prevent damage - Multiple power settings - HiPulse: 6:00 / 150 - LoPulse: 12:00 / 75 - Solid: 4:00 / 150 - Paceline: 32:00/ 5 - Ultralight system weight: 102 grams - Designed and Assembled in California - Backed by Light & Motion’s 2 Year Warranty and Enhanced Experience Guarantee Included: - Seat Post Mount, Micro USB Charging Cable
An ideal front and rear combo kit for the daily rider that values performance, reliability, and convenience. The Urban is a classic style headlight, with a button that gives the user 4 different modes to choose from. The smart Vya taillight features auto on/off technology with no buttons – just start riding and it automatically activates the SafePulse beam. High visibility is paramount and dedicated amber sidelights front and rear are distinct and easily recognizable by drivers, especially through intersections. Reliable construction is unmatched in the market and exceeds the needs of daily riders as both lights are certified to withstand 1 meter drops on concrete and are fully waterproof to ensure long-term reliability. Recharging is fast and efficient with a Micro USB cable (Urban) or plugging directly into a USB port (Vya). Blending the best-selling Urban 500 headlight with the state-of-the-art Vya, daily riders now have the perfect setup to stay safe and visible. Features - 500 Lumen Headlight and 50 Lumen Taillight certified to the FL-1 Standard with premium CREE LEDs - Visibility is enhanced with amber side lighting front and rear providing maximum safety through intersections and high-traffic areas - Pulsing beam patterns provide effective visibility day and night - Vya Taillight features smart auto-on/auto-off technology for commuter convenience - Secure mounting with durable straps prevents lights from moving when riding on uneven/bumpy terrain - Quick release allows removal in seconds while leaving the base mount on the bike - Waterproof design eliminates the leading cause of bike light failure – water immersion - Charging is reliable and efficient with included Micro USB cable (Urban) and through direct USB blade (Vya) Headlight Specifications - Lumens: 500 (high), 250 (medium), 125 (low), 125 (pulse) - Runtime: 90 min (high), 180 min (medium), 360 min (low), 720 min (SafePulse) - Beam Angle: 20° (spot) - Charge Time: 270 min
Powerful output, compact design, and robust engineering creates the perfect cord-free trail light. Penetrating spot beam provides ideal illumination for both helmet and handlebar setups with innovative mounting options including a versatile GoPro interface. Featuring: - 1000 Lumen Output (FL-1 Certified) With CREE LED - Custom Optics Optimized to Enhance Trail Definition - Waterproof Design Provides All-Weather Reliability - High/Medium One Touch Toggle Mode - Micro USB Rechargeable With Fast Charge Technology - Quick Release Handlebar Mount and GoPro Interface Included: - Quick Release Handlebar Mount, Helmet mount, GoPro Mount, & Micro USB Charging Cable
This mount is designed to securely attach your Light and Motion Seca, Vega, or Stella headlight (sold separately) to your helmet. With a helmet mount, the light is always pointing where you're looking.
Serious trail riders demand comfort, mobility, and protection, and the Ridge gloves deliver on all these fronts. Their durable, full-finger design features innovative technologies, like our XRD foam knuckle protection, a pre-curved articulated fit, and a conductive silicone print on the thumb and pointer fingers for convenient touchscreen compatibility. And impressively, we achieved all this while still providing a clean look to impress your trail buds. - Clarino synthetic leather palm provides durability without sacrificing bar-feel. - LifeLine palm construction eliminates bunching, providing a second-skin fit with better feel at the bars. - XRD protective foam is strategically sewn into ripstop fabric to protect your fingers. - Wrap-around palm construction adds crash protection reinforcement where you need it most. - The debossed neoprene adjustable cuff closure makes for a snug fit around your wrist, keeping unwanted debris from sneaking into your gloves. - Compatible with conductive touchscreens.
SKS's S-Blade rear fender attaches easily to almost any road bike seatpost, protecting you from road spray and letting you ride through the wet.
The X-Blade 26/27.5-inch is a high-quality 2-component fender for the rear wheel of mountain and trekking bikes. Due to the quick-release mounting, the fender can be fitted to almost any seat post and optimally adjusted to the wheel using the 2-joint technology. - High performance dual compound plastic - Easy quick-release-fastening by pre-adjusted powerstrap - 2 joints for optimized adjustment to all frames - Optimized dirt protection - 26-inch and 27.5-inch wheel compatible
The X-Blade 27.5+/29-inch is a high-quality 2-component clip-on fender for the rear wheel of a 27.5+/29-inch mountain and trekking bikes. Due to the quick-release mounting, the fender can be fitted to almost any seat post and optimally adjusted to the wheel using the 2-joint technology. - High performance dual compound plastic - Easy quick-release-fastening by pre-adjusted powerstrap - 2 joints for optimized adjustment to all frames - Optimized dirt protection - 27.5+ and 29-inch wheel compatible
MSW USB rechargeable taillight. Includes micro USB cable for charging. - Tool-free installation - Aluminum body construction - 15 lumen output - Fits 19mm–48mm tubing - 28g weight
This ultra long clip-on mudguard set for road bike tires (up to max. 25mm width) protects you, whether you’re riding your road bike in a warm summer rain or on solitary winter trips. The end of each mudguard extends to below the hub axles. This length ensures a full coverage, meaning you, and also the cyclist behind you, are spared from splashing. They can be perfectly adapted to the radius of the wheel by adjusting the length of the stays. Once the metal mounting brackets are fitted to the bicycle, the mudguards can be clipped on and off in seconds making them ideal for use as needed. Brackets attach at brake bolts and skewers. - End of each fender extends to below the hub axles - Length ensures full coverage for the user and those riding in proximity - Can be adapted to the radius of the wheel by adjusting the length of the stays
Specialized's Renegade Gloves are designed for the ultimate in comfort. By combining lightweight, breathable mesh materials on the top of the hands with the durable AX Suede material in the palm, you experience the feeling of a second-skin fit for maximum bar control on tricky descents and steep climbs. High stretch knit cuffs, meanwhile, have been finished with Bemis tape for a clean, flat fit that conforms perfectly with your wrists. - Pre-curved finger construction provides the maximum degree of articulation for enhanced bar control. - High-stretch knit cuffs are finished with Bemis tape for a clean, flat fit that conforms perfectly to your wrists. - Mesh top-hands are combined with power net forechettes to promote airflow that'll keep your hands dry and comfortable. - Conductive silicone print on thumb, pointer, and middle fingers are touchscreen-compatible.
Typically, this packable vest category has been dominated by lightweight ripstop fabric pieces that provide good wind and spray resistance, but a whole lot of flapping and noise. Our goal was to give you everything you need, without sounding like a flag in a breeze. We engineered a stretch fabric that conforms to your body, providing a soundless ride, while providing wind resistance. To resist spray, we treat the front panel fabric with a durable water repellant coating, while leaving the back panel fabric untreated to increase breathability. The vest balls up into a fist size ball. - Deflect is a lightweight stretch woven fabric that's wind-resistant, water-resistant, and highly breathable. - Lightweight fabric and minimal construction allow vest to be packed into your jersey pocket when it isn't needed. - Full-length front zipper allows for easy ventilation when your efforts heat up. - Partial elastic at the waist and shoulders seal out the cold. - Deflect UV 50+ protects your skin from harmful ultraviolet rays. - Form Fit closely and precisely conforms to the curves of the body, ensuring an unrivaled level of fit. and comfort, while still allowing room for a jersey or base layer underneath - Fabric weight: 49g
$75.00 - $90.00
Riding in the wet is never fun, but Specialized's Deflect H2O gloves at least make it bearable. Their design includes a breathable outer-layer that's fully waterproof. Add to this some tech features like touchscreen compatibility and cuffs designed to work in harmony with long sleeves, and you have your go-to protection for stormy days in the saddle. - Fully waterproof Outdry membrane provides reliable protection from the elements. - High-grip palm for maximum wet weather dexterity. - Wiretap touchscreen compatible for easy use of smartphones. - Reflective details enhance your visibility in low-light conditions. - Windproof brushed microfiber thumb wiper.
In the shoulder seasons, you'll find that conditions are far from ideal, but not so intense that you'll form icicles on your beard whiskers. In these times of year, you'll find a solid minimalist jacket, like our Women's Element 1.0 Jacket, will be the ideal piece for your ride. The jacket is made from our Element Soft Shell material, which is both wind- and water-resistant, as well insulating. And as the 1.0 iteration of this jacket, this fabric is used throughout order to provide coverage and protection from the elements where it's needed most. The fabric is also extremely lightweight and malleable, so you'll experience the perfect amount of stretch in all of the right places throughout the motions of cycling. Its use equates to a lightweight, minimal barrier between you and the elements, which is perfect for fair conditions or any fall/winter riding at a hard pace. The Element 1.0 also includes additional weather-fighting properties, like a pop collar that prevents unwanted chills and moisture from entering the jacket via the neck opening. And lastly, three rear pockets and one zippered security pocket at the back handle storage duties. - Element Soft Shell knit fabric is used throughout, providing exceptional levels of insulation and breathability, while also being quite adept at resisting both wind and water. - Three standard back pockets and zippered back security pocket provide ample room for storing your essentials. - Pop collar seals out the cold and adds a little extra protection from the elements. - Reflective elements increase your visibility to motorists in low-light conditions. - DeflectUV 50+ protects the skin against harmful UV rays. - Form Fit provides a second-skin feel without inhibiting movement or flexibility.
Our new LoDown gloves are all about the fit. The comfortable, durable, and pre-curved construction prevents fabric bunching, and this equates to a second-skin fit. Why is this important? Because it gives you maximum bar control on tricky descents and steep climbs. - Clarino synthetic leather palm provides durability without sacrificing bar-feel. - LifeLine palm construction eliminates bunching, providing a second-skin fit with better feel at the bars. - Perforated thumb panel is strategically ventilated for improved breathability while riding. - Four-way stretch nylon at the top of hand is paired with light compression for tough durability and tremendous comfort over a wide range of trail conditions. - Slip-on cuff is located low on the wrist to provide a snug and secure fit. - Compatible with conductive touchscreens. - High-stress areas are reinforced by features like a rolled-index fingertip.
$14.00 - $22.00
- Lightest and most versatile MTB mudguard available - Uses hook and loop Velcro straps to attach to the bridge and lower legs - Compatible with forward and double bridge fork designs and all wheel sizes - XL version is longer and provides more coverage - Reverse version is designed for forks with reversed bridges - Fat Face, you guessed it, extra wide for Fatbike applications
Around Specialized HQ, this piece is called the "quiver-killer" and the prototypes have mysteriously disappeared. In the past, you had to decide whether you wanted to have a lightweight packable jacket that would protect you from wind or a not-so-packable jacket to protect you from water. Now you don't have to choose, as we have created a jacket for both conditions while allowing full packability. Using a lightweight shell fabric and ultra-thin water-proof breathable membrane, the Deflect H2O Pac Jacket provides the protection of much heavier pieces that will fit into a jersey pocket. We added all the standard water protection features in this one: taped seams, YKK Water Guard Zippers, and wrist cuffs engineered to seal water out. - Deflect 2.5-layer is a woven fabric that's wind-resistant, water-resistant, and highly breathable in order to maintain an effective barrier between you and elements. - Fully taped seams prevent water intrusion at the stitches and seams. - Partial elastic at the waist and wrists seals out wind and water. - Watertight YKK AquaGuard zippers prevent unwanted water seepage. - High-visibility reflective elements increase your visibility to motorists in low-light conditions. - Deflect UV 50+ protects your skin from harmful ultraviolet rays. - Form Fit closely and precisely conforms to the curves of the body, ensuring an unrivaled level of fit. and comfort. - Fabric weight: 72g
Stay clean and dry with SKS's Commuter II fenders! The stainless-steel hardware comes pre-installed for quick and easy mounting.
The All New NiteRider Lumina Dual 1800 represents the next evolution of our best-selling Lumina headlight into a dual LED set-up that produces a far-reaching beam pattern with extensive peripheral illumination; making it the ideal choice for any riding situation or terrain. The Dual emits an amazing 1800 lumens while in Boost Mode, making it one of the brightest self-contained bicycle lights available today. Simply double tap the power button to set the light to Boost Mode. When in Boost Mode, the power button will illuminate red and blue to notify the user at a glance. The Dual is also equipped with side lighting to increase your visibility day or night. Tested, meeting an IP64 rating; The Dual 1800 is designed to be used in a variety of riding conditions because of its high resistance to water and dust. Its high-strength Dupont Fiberglass reinforced nylon body casing and aluminum heat sink are engineered for extreme resistance to cracking and abrasion. - All New Collimator Lens, distributes a smooth widespread beam pattern - Side lighting for increased visibility day or night - Long lasting 20 hour runtime at 100 lumens in Walk Mode - 5 Light Levels plus 2 Daylight Flash Modes - FL1 Standard IP64, dust and water-resistant - Secure on and off-road capable handlebar mount - Fits standard and oversize 35mm handlebars - Helmet mountable (Helmet Mount sold separately) - Fast 3 hour charge via the included AC power charging adapter - Low battery indicator - Extend your ride time, 6 hour runtime at 350 lumens in Low Mode - Boost Mode indicator, power button will light up red and blue - Boost Mode, double tap power button to unleash maximum LED output at 1800 lumens! - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 7 seconds to lock out operation of light. WARRANTY - The Lumina Dual 1800 is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - Dual LED Head Light - Internal Li-Ion Battery - Handlebar Mount fits up to 35mm - AC Power Charging Adapter
When you need comfort and performance at a tremendous value, look no further than our Women's RBX Long Sleeve Jersey. It's made from our VaporRize knit fabrics that place a focus on balancing durability and moisture management, which means that you get a jersey that'll be long-lasting and quite comfortable over the long haul. Adding to the comfort, you'll find that we included a full-length front zipper for on-the-fly venting, as well as our Regular Fit. This cut hits the sweet spot in-between race and classic, so it's perfect for long, all-out rides, yet it's roomy enough to avoid any pinching or the feeling of being constricted in your movements. There are also three rear expansion pockets to house all of your small ride essentials, plus additional side panel pockets and hidden zipper pocket. - Soft knit fabric pairs with breathable mesh to tackle moisture management, while remaining soft against the skin and supportive in all the right places - Three standard pockets provide ample space to securely house all of your ride essentials and electronics - Full-length front zipper gives you the power to manage ventilation under hard efforts or chilly descents - 30+ UPF rating protects your skin from harmful ultraviolet rays - Women's Specific Regular Fit is generous, so it fits close to the body without being constricting
Portland Design Works has given the original fat bike front fender a facelift! The Mud Shovel 6.5 Front Fender was designed specifically for fat bikes - they're extra long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure. Made of heavy-duty polymer, the Mud Shovel 6.5 Front Fender is super lightweight but sturdy enough to take years of bad weather abuse. The fender mounts to the downtube of your bike using adjustable rubber straps for a secure fit. - Front fender is 254mm wide and 622mm long (10"x24.5") - Extra-long, wide design blocks snow, water and sand - Bracket keeps fender super stable and is easy to install - Built with lightweight, sturdy materials for durability
Your relationship with the weather forecast can be touch and go. Sometimes the forecast is right, but often times, not so much. And for when the weather doesn't want to cooperate, there's the Deflect Jacket with SWAT. Pertex Nylon was used for its breathability and wind resistance, and with a DWR coat, it's also water-resistant. To add to its mountain capability, we've added abrasion-resistant panels to the arms of the jacket, so it won't rip or tear easily when you're shredding singletrack. Unlike many of our other SWAT products, this jacket doesn't house a myriad of pockets. Instead, it has one—simple and clean. While it may seem like a normal stuff pocket, it's actually been designed in a rectangle shape to fit into the down tube of our SWAT-equipped bikes. The Deflect Jacket with SWAT is sure to be your go-to variable weather jacket, both on and off the bike. - The Deflect jacket uses lightweight Pertex Quantum Air fabric engineered to offer wind and water resistance with best-in-class breathability for hard efforts. - Minimal bulk and a built-in pocket helps it fit into any pocket, pack, or bike equipped with SWAT. - Pertex nylon fabric is couple with a DWR treatment to protect against water. - Abrasion panels are designed to protect the jacket through the toughest trail conditions. - Under helmet integrated scuba hood with fixed elastic binding creates added protection with the perfect fit.
We don't condone rutting out trails when it's pouring cats and dogs, but if you find yourself caught out, having the Deflect™ H2O Mountain Jacket will get you out of a jam. The solution to this problem all starts with the materials, which is why we used our own three-layer Deflect fabric for the construction. This woven fabric rests at the pinnacle of active weather protection, boasting equal parts breathability and wind resistance. And furthering these features, the jacket includes protective wrist seals and watertight, coated zippers throughout. To keep water off of your head, the jacket also features a three-panel hood with a rain visor that easily fits under your helmet. For protected storage of all your goods, we included a zippered chest pocket. - Deflect 3-layer is a stretch woven fabric that's wind-resistant, water-resistant, and highly breathable in order to maintain an effective barrier between you and elements - Suede zipper shield protects your chin from abrasion. - Fully taped seams prevent water intrusion, keeping you dry and protected for years to come. - One zippered chest pocket houses your small ride essentials and electronics - Watertight YKK AquaGuard® zippers prevent unwanted water seepage. - Adjustable wrist seals prevent wind and water intrusion. - A hood with a rain visor and adjustable drawcord keeps your head protected from the elements. - High-visibility reflective elements increase your visibility to motorists and other trail users in low-light conditions. - Deflect UV 50+ protects your skin from harmful ultraviolet rays. - Bluesign-approved fabric. - Relaxed Fit is loose and comfortable, and also provides plenty of room for layering underneath. - Fabric weight: 106g
Completely windproof and warm as can be, Specialized's Element 3.0 are the gloves you need when the temperatures plumment. The Gore Windstopper upper keeps your hands warm while you ride, the paired fingers contribute more warmth, and the easy on and off slip-on cuff minimizes bulk. Body Geometry technology relieves pressure from your hands so you can be sure to stay comfortable for the long haul.
From footballers to break dancers, the track jacket has been adopted by many incarnations of cool, and now, it's cycling's turn. Specialized's Shasta Track Jacket takes the fashionable stylings of a traditional track jacket and morphed the construction and cut to meet the needs of an active lifestyle. The knit materials used for the jacket are ridiculously soft, making it the perfect complement for all aspects of your activities—pre, during, and post. And the women's-specific cut is designed to provide the utmost in comfort, regardless of the jacket being worn alone or as a layering piece. - VaporRize knit fabrics feature a winter weight construction for added insulation and comforting warmth in the colder months. - Reflective elements increase your visibility to motorists and other riders in low-light conditions. - Two front zippered pockets provide safe & secure housing for your workout essentials, like a phone, keys, or nutrition. - Deflect UV 50+ protects your skin from harmful, ultraviolet rays. - Our Standard Fit is specifically designed for women, and it's generous and comfortable, while allowing ample room for layering underneath.
Our Body Geometry Dual-Gel Long Finger gloves are all about comfort. They feature strategically placed gel pads throughout the palm to alleviate hand fatigue by relieving pressure on the ulnar nerve. This design also comes with the added benefit of minimizing hand numbness, as well as reducing many other negative effects that come as a result of road vibrations. Breathability has also been accounted for at the back of the hand, while a secure fit is ensured by a contoured Velcro closure. And lastly, phone use is a non-issue, as the fingertips are designed to be touchscreen-compatible. - Synthetic suede palm is made from a thin microfiber to combine durability with exceptional grip and comfort - Body Geometry Dual Gel padding uses two layers of gel that provide exceptional impact and vibration damping without compromising bar grip or control - Soft and absorbent Microwipe thumb brushes away sweat with ease - Contoured Velcro wrist closure offers easy adjustment and entry/exit from the gloves - Reflective elements increase your visibility to motorists in low-light conditions - Compatible with conductive touchscreens
Impact friendly comfort - 4-way stretch, breathable mesh back with knuckle protector panel - Durable synthetic leather palm with critical padding - Additional knuckle and finger molded protection - Silicone print palm and fingertips for grip - Sure-fit wrist cuff with Velcro adjuster - Terry sweat wipe on thumb - E-swipe touch screen compatible finger and thumb
Page 1 of 5 Next page