Accessories/Parts

Saris' Locking Hitch Tite adds both stability and security to your hitch rack. It tightens up the interface between your rack and hitch to combat swaying and it locks your rack to your vehicle. It fits 1-1/4 and 2-inch threaded hitch-tites and is compatible with the 200/500 Series T-Rax, all Thelma racks, standard-model Cycle-Ons, and all the T-Bones racks (each sold separately).

Simply insert Saris' Hitch Tite into the hitch receiver to give your Saris bike rack (sold separately) extra stability. The Hitch Tite is compatible with the Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On, and T-RAX Sport racks.

Thule's Snug-Tite Receiver Lock secures their T2, Doubletrack, Roadway, and Parkway receiver-type racks (also called "hitch racks"). Just insert the Snug-Tite in place of your receiver pin and the rack is locked in place.

Some vehicles require extra strap length. Compatible with Saris' Bones bike racks, the Saris Extra Long S-Hook Straps 80" are made of strong nylon with coated hooks that protect your car's finish.

Saris' Protect-O-Pads are foam blocks that separate and protect your bikes when multiple bikes are being transported. They come in packs of four.

- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames

Don't leave your fat bike behind! Saris' Freedom Fat Tire Wheel Holders carry up to 5-inch-wide bicycle tires. Extra-long straps secure your bike to any Saris Freedom rack (sold separately).

Saris' Spare Tire Plate is for use with their spare tire racks. Grab the Spare as an extra or replacement part.

- Powdercoated steel body with 9mm skewer & hole in handle for padlock

An adapter for Kuat's Trio roof rack to make it compatible with most 15mm thru-axle fat bike forks. Includes rear tire strap extension. Available in 142mm and 150mm-wide models.

Kuat's Dirtbag may not be the prettiest thing out there, but it's strong, dependable, and mounts just about anywhere. Just bolt this little guy up to a solid surface, then remove your front wheel, thread in your 20mm thru-axle, and you're all set.

Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 4 SKS Cores and matching keys - 2 keys included plus a control key

Creating the world's most aerodynamic and colorful bike racks since 1993, we've leveraged our knowledge of the bike rack industry and it's ever changing technologies to create the world's most versatile and elegant platform hitch rack. Perfect for the bike enthusiast or recreational rider, the SplitRail Single Add On pairs with the 2" SplitRail to accommodate 3 or 4 bikes. Each add on is engineered with 4" of side-to-side adjustment, which makes fitting anything from kids to adult bikes simple and easy. An integrated cable lock secures bike to rack (lock core and keys included). 40lb max weight per bike with add on(s). 3-bike configuration: 12" spacing (on center) between bikes. 4-Bike configuration: 12" spacing (on center) between bikes one and two; 9" spacing (on center) between bikes two, three, and four. RockyMounts stands by its products by offering a lifetime warranty. - Compatible with 2" SplitRail (SKU 1140, sold separately) to expand carrying capacity to 3 bikes (requires oneAdd On) or 4 bikes (requires two Add Ons) - Lightweight chromoly and aluminum construction - Fits bikes with 20-29" wheels and "Plus" size tires. 48" max wheelbase - 4" of side-to-side tray adjustment for simple and easy loading and unloading of bicycles - Integrated cable lock secures bike to rack - Due to weight restrictions of 1.25" hitches, the SplitRail Single Add on can only be used with the 2" SplitRail - SplitRail rated 5 out of 5 stars on MTBR (August 2016) - RockyMounts offers a lifetime warranty on all of our products - Want to match keys to your existing SplitRail or any other RockyMounts products? Simply add your key number (ex. E144) in the "comments" field at checkout

Made for the shade, Yakima's new awning delivers excellent protection from searing sun and sudden showers. It mounts quickly and easily to the side of your base rack and only takes up six inches of bar space so it won’t crowd your kayaks, cargo boxes, or bikes. It’s super easy to use – just pull it out window-shade style and insert the poles when you get to camp. The light, strong nylon canopy has a waterproof PU coating to shed rain and delivers 42 square feet of shady coverage on summer days. Universal mounting hardware fits most roof racks. Product details: - Universal mounting hardware fits most roof racks. - Provides 42 square feet of sun and weather protection - Rolls into a 6.5 foot wide case when not in use, leaving tons of room on your roof rack for other gear - 420D-nylon fabric with PU coating is light, durable and waterproof - Easy to pitch – just pull it out, prop it up, and settle in - Super-simple attachment – no tools required - Includes locks to roof rack with SKS Lock Cores for added security Technical specs: - Weight: 20.00 lbs. - Dimensions: L 80.00” x W 4.00” x H 4.00”

Tailor your towers – these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.

Maximize your kayak carrying ability with The stacker. It can hold up to 4 kayaks stacked on their side taking up the least amount of roof space. - Fold-down steel design with non-scratch outer coating - Quick on/off hardware ensures fast installation and removal - Optimally sized carrier leaves roof space for other Thule accessories - Carries up to 4 kayaks and requires 1 to 2 people to load and unload them - Includes straps to transport 2 kayaks - 1 to 4 carriers per vehicle - Accommodates kayaks up to 36” wide and 75 lbs - Requires Thule rack systems crossbars, round bars or factory racks (sold separately) - Primary watercraft: Kayak

Yakima's Bolt Toploader Brackets are permanently mounted brackets that allow Yakima 1A Raingutter Towers or Q Towers to be used in some situations where your car doesn't have rain gutters (towers sold separately).

The KeelOver attaches directly to any roof rack for a quick, tool-free assembly, right out of the box. Not only will your canoe arrive to the water safely, but youll get to spend more time on the water, making for many happy paddlers. - Universal design attaches to round, square, aerodynamic and factory bars with a single tightening knob - Includes canoe securing straps and bow / stern tie-downs ensuring you have everything needed for a single canoe - Durable over-molded rubber cushions the canoe gunwale while providing stability - Simple, tool-fee installation and assembly within minutes of opening the box - Dual bolts included to ensure an integrated fit to vehicle - Rubber padding protects your crossbars from damage or corrosion

Pair of EndCaps for Yakima CoreBar.

Kuat's Dirtbag may not be the prettiest thing out there, but it's strong, dependable, and mounts just about anywhere. Just bolt this little guy up to a solid surface, then remove your front wheel, thread in the skewer, and you're all set.

A smart fairing that easily attaches to any Yakima bar—and just about anyone else’s—to quiet wind noise and reduce drag. - Moves airflow up and over the rack to reduce drag and quiet wind noise - Band-style attachment quickly and easily attaches to any crossbar - Secures with easy-to-reach adjustments and included tool - Available in 4 sizes; find your fit at yakima.com/fit

Thule Traverse Fit Kit is designed to integrate with the Thule Traverse foot, creating a multi-purpose roof rack base system for your specific vehicle. The unique fit that the Fit Kit provides is the most solid and secure base rack possible.

Thule's Accessory Strap Kit is a set of four rubberized, replaceable, ladder-style straps for use with many of Thule's bike racks and anti-sway cradles.

A flexible, kayak carrier with felt-lined saddles that make it easier to load and unload. Features - Easily load and unload the kayak with the pivoting felt-lined rear saddles that help glide and center a kayak onto the vehicle - Two independent pivoting saddles with angle-setting lever conforms to limitless range of hull shapes - Protects the hull with large, flexible, cushioned pads - Quickly secure the kayak using the center load straps with car-protective buckle bumpers and QuickDraw bow and stern tie-downs - Fits a variety of Thule rack systems, round bars and most factory racks due to T-Track and FlipFit brackets - Accommodates kayaks up to 36 in/90 cm wide and 75 lbs/35 kg Technical specifications - Load capacity: 75 lb - Dimensions: 5 x 8 x 5.5 in - Weight: 6.8 lb - Length of straps: 2x15' - Fits AeroBlade, SquareBar, and Xsporter Pro

Thule Traverse Fit Kit is designed to integrate with the Thule Traverse foot, creating a multi-purpose roof rack base system for your specific vehicle. The unique fit that the Fit Kit provides is the most solid and secure base rack possible.

RockyMounts' Locking Quick Releases are so super-smooth, you'll probably want to put them on your bike wheels. Alas, that's not exactly what they're for. Use the Locking Quick Release to upgrade an old RockyMounts rack or, for those of you who give your racks a lot of use, replace a worn-out quick release on any model of RockyMounts rack.

Use the RockyMounts Lock Cores to secure your belongings, whether you're using the TieRod, PitchFork, TailPipe, LiftOp or any other RockyMounts rack. Each pack of Lock Cores comes with two keys and one, two, four, six, or eight lock cores.

The RockyMounts LoBall is a ridiculously easy bike rack solution for trucks, trailers, vans, SUV's, and home storage. It includes a non-locking, 9mm chromoly quick release.

The RockyMounts HotRod is a do-it-all truck mount for bikes with 12x100, 15x100, and "Boost" 15x110 thru-axles.

The Swiss Army of truck racks is now even better. Redesigned to save previous real estate in truck beds, the DriveShaft Track is better than ever before. 12mm, 15mm, 20mm thru-axle bike rack carrier for truck bed channels found in Toyota, Chevy, GMC, and Nissan. RockyMounts DriveShaft is the first on the market with the ability to carry 12/15/20mm thru-axles and to securely lock your bike. The mouth opens wide for easy loading and the cam lever adjusts like a quick release for a strong hold. Snap-in nylon shims prevent the axle from being unscrewed and allows you to switch between 12mm, 15mm, and 20mm loads.