Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Hubs

SRAM MTH 746 Rear Hub
$109.00
Whether your joy comes from barreling downhill, or tearing up to the top, SRAM's MTH 746 rear hub will leave a smile on your face. An aluminum hubshell with machined flanges grant the hub a low weight without compromising durability. Plus, tough cartridge bearings roll smooth for the long haul.
Race Face Vault Front Hub
$174.99
- An oversized hub shell increases torsional and lateral stiffness - 6902 bearings for maximum durability - Wide bearing placement was designed to decrease load on the bearings - Low-drag labyrinth seals - Tool-free endcaps - Torque-cap compatible - Includes standard 15mm end-caps only, Torque must be purchased separately
HALO Replacement Driver, DJD Bush Drive
$95.95
- Replacement driver for Original DJD or DJD-Bush Drive rear hub - Need DJD Original removal tool or DJD Bush Drive removal tool (sold separately)
Stan's NoTubes XD Freehub Conversion Kit (Stan's 3.30 Hubs)
$80.00
This conversion kit allows you to use SRAM's 11-speed mountain cassette on your Stan's NoTubes wheels. Each kit includes an XD freehub, spacer, drive side end cap, and three sealed bearings.
Stan's NoTubes 3.30/3.30Ti Rear QR Caps (Type 2 Axle)
$23.00
Replacement end caps for Stan's NoTubes ZTR/3.30/3.30 Ti rear hub. They're compatible with a Type 2 hub.
SRAM 900 Rear Hub
$209.00
Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM'S 900 hubs are ready for the challenge. On the inside, the smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike. - Versatile driver body can accept ROAD or MTB drivetrain, full spline or XD cassettes - Fully convertible with tool-free end caps - BOOST variants - 24, 28 or 32 spoke holes
Chris King R45D Centerlock Front
$264.00
R45 Centerlock hubs combine a lightweight hub body, our legendary made-in-house bearings, and now Centerlock compatibility to harness the power of disc brakes. The result is the increased power and modulation of disc brakes, the fast, smooth rolling speed of our bearings, and the rail steering from our one piece solid axles. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use. - Engineered, manufactured and assembled in Portland, Oregon USA - Legendary made-in-house bearings - 5-year built-to-last warranty - Easily convertible axles 100mm x 9mm QR or 100mm x 12mm thru axle front options. - Easily serviceable and completely re-buildable with our R45 Hub Service Tool
Hope Fatsno 15mm Front Conversion Kit
$29.21
15mm thru-axle conversion kit for Hope Fatsno front hubs.
Shimano Deore XT M8100 Front Hub
$54.99
With simple setup and reliable trail performance, the Shimano Deore XT 8100 front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with Center Lock spline mount and lock ring - Tool-less 15mm thru axle system optimizes rigidity and weight - Simple setup and reliable trail performance
Hope Pro 2 & Pro 2 Evo QR Front Hub Conversion Kit
$32.29
Hope Front Axle Conversion Kits · Compatible with Pro 2 and Pro 2 Evo hubs
Hope Pro 2 Evo Rear 12x142mm Conversion Kit
$25.00
12x142mm conversion endcaps for Hope Pro 2 Evo rear hubs.
Shimano Alfine Dynamo 3.0W Center Lock Disc E-THRU Front Hub
$145.99
The Shimano Alfine DH-UR705-3D Dynamo hub employs a new internal unit construction that is lighter and also reduces dynamo drag while producing 3 watts. It is designed for 26 to 28-inch Center Lock wheels and uses a 12 x 100mm E-THRU axle design. - New internal unit construction is 28g lighter than DH-T8000-3D - More efficient wheel rotation reduces dynamo drag by up to 44% from DH-T8000 - Proper positioning with 12mm E-THRU - Angular contact bearings - Compact & lightweight - Low rotational resistance - Effortless setting of disc rotor - Durable sealing performance
Shimano HB-RS470 Front Hub
$29.99
The Shimano HB-RS470 front disc brake hub features a Center Lock design, Internal Grease Sleeve, and Cup and Cone Bearing technology. - The Center Lock system makes for easy rotor installation with a quick and secure spline mount and lock ring - Hub features internal o-rings and a grease sleeve that helps maintain grease levels and increases service life
Shimano MT900-B Front Hub
$67.99
The Shimano HB-MT900-B front hub for Center Lock disc brakes provides faster acceleration by reducing inertia and weight.
Shimano SLX M7100 Front Hub
$43.99
With simple setup and reliable trail performance, the SLX front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with Center Lock spline mount and lock ring - Tool-free 15mm thru axle system is stiff and lightweight - Simple setup and reliable trail performance
Shimano 105 HB-R7000 Rim Brake Front Hub
$31.99
Internal O-rings, a grease sleeve, and high-quality cup and cone bearings lend this 105-level hub high durability and smooth rolling. - Internal O-rings and grease sleeve - High quality, sealed Cup & Cone Bearing - High durability and smooth rolling for sustained performance
Chris King R45 Cassette Lockring
$37.00
Designed with today’s taller, double-digit cog stacks in mind, Chris King's R45 cassette lock rings feature longer threads to provide secure engagement with the hub driveshell. A Chris King cassette lock ring is the perfect complement to any Chris King hub, or for anyone looking to add a dash of King performance to other manufacturer’s compatible rear hubs. They are available for both 11 and 12 tooth small cogs, as well as Shimano or Campagnolo hubs.
Chris King R45 Rear
$451.00
When we set out to design our R45 hub we had over 30 years of bearing experience and 20 years of building hubs under our belts. The R45 is the culmination of that experience; we focused on creating a lightweight road racing hub that utilized hallmarks of Chris King components: precision, performance, and quality. Our R45 rear hub combines a redesigned RingDrive system with 45 teeth for lower drag and near instant engagement with a lightweight hub body and our legendary made-in-house bearings. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use. The patented Chris King RingDrive with 45-points of simultaneous-engagement will get your power to the ground fast, provide unmatched engagement, and give you that legendary Chris King angry-bee sound. - Engineered, manufactured and assembled in Portland, Oregon USA - 5-year built-to-last warranty - Legendary made-in-house bearings - Easily serviceable and completely re-buildable with our R45 Hub Service Tool
Chris King R45 Front
$230.00
The R45 front hub is built to address our road and cross riders’ demands for Chris King performance in a lighter weight and more aerodynamic package. Defined by a narrow hub body and low flanges the R45 front hub is a sleek base for the fastest wheels. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use. - Engineered, manufactured and assembled in Portland, Oregon USA - 5-year built-to-last warranty - Legendary made-in-house bearings - Easily serviceable and completely re-buildable with our R45 Hub Service Tool
Paul Component Engineering Disc WORD Rear Hub
$182.00
- Adjustable double sealed cartridge bearings and labyrinth seals - Wide canted flanges build a no dish wheel - Large 8mm bolts and knurled washer face for maximum hold - Accepts 24tpi BMX freewheels. 300g - 32-hole - Made in USA
Stan's NoTubes 3.30 Shimano/SRAM Freehub Body (9/10-speed)
$74.00
Replacement Shimano/SRAM freehub body for Stan's NoTubes 3.30 rear hubs.
Surly Ultra New Rear Hub (135mm)
$75.00
Surly's Ultra New Rear Hub is ready for singlespeed mayhem. This gorgeous hunk of aluminum has the capability you need with reliable sealed bearings. It's available with threads for fixed cogs or freewheels, so you can set up the drivetrain of your dreams. Plus, this hub's 135mm width fits most MTB frames and the hollow chromoly axle provides a flex-free ride as well as simple quick-release skewer compatibility.
SRAM X0 Rear Hub
$382.00
SRAM's X0 Hub offers lightweight, reliable performance. Ultra-durable, high-precision Speedball bearings spin smoothly in all conditions, and the tapered aluminum axle provides strength with minimal weight. This hub devours techy sections with it's super-smooth 6.9-degree engagement Double Time ratchet system. It accommodates standard 6-bolt rotors and comes with 12mm through-axle end caps and a 9mm quick release, so you can customize it to fit your ride.
DT Swiss 240s MTB 6-Bolt Front Hub
$265.00
The DT Swiss 240s MTB 6-Bolt Front Hub hits the sweet spot between low weight and reliability. With multiple axle options, you can build up a high-end wheel for nearly any bike. On the winning end of countless World Cups and local races in every discipline from XC to enduro to downhill, these hubs are the centerpiece for thousands of nearly frictionless rides.
SRAM 900 Front Hub
$83.00
Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM's 900 hubs are ready for the challenge. On the inside, their smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike. - Fully convertible with tool-free end caps - 24, 28 or 32 spoke holes
Stan's NoTubes 3.30/3.30Ti 12mm Rear Thru-Axle Conversion Kit
$34.00
Converts a Stan's 3.30/3.30Ti rear hub to a 12mm thru-axle. Compatible with both Type 1 and Type 2 rear hubs.
Chris King R45D Centerlock Rear
$482.00
R45 Centerlock hubs combine a lightweight hub body, our legendary made-in-house bearings, and now Centerlock compatibility to harness the power of disc brakes. The result is the increased power and modulation of disc brakes, the fast, smooth rolling speed of our bearings, and the rail steering from our one piece solid axles. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use. Product Benefits - Engineered, manufactured and assembled in Portland, Oregon USA - Legendary made-in-house bearings - 5-year built-to-last warranty - Patented RingDrive system with 45 simultaneously engaged points of contact for virtually drag free engagement - Easily convertible axles 100mm x 9mm QR or 100mm x 12mm thru axle front options. 135mm x 10mm QR or 142mm x 12mm thru axle rear - Easily serviceable and completely re-buildable with our R45 Hub Service Tool - Ceramic bearing upgrade available - Lockring is sold separately (PHB355) and is required for rotor installation on rear hub
Chris King ISO SD Front
$241.00
The Chris King ISO Small Diameter (SD) front hub is designed for mountain bikers seeking a lightweight hub that doesn’t compromise performance. Milled from solid bar stock, the high flange diameter grants the use of shorter spokes and a wider bracing angle to increase wheel strength. Proven by professionals and chosen by privateers, our ISO SD hub puts you in the race with legendary Chris King performance. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use. - Engineered, manufactured and assembled in Portland, Oregon USA - 5-year built-to-last warranty - Legendary made-in-house bearings - Easily serviceable and completely re-buildable with our Chris King Hub Service Tool - Responsibly lightweight - Easily convertible between standard QR and 15x100mm axles - Drilling: 32h
HALO Spin Doctor 6F Disc Front Hub
$99.95
Light, but strong enough for all types of riding including XC through DH - Forged, CNC machined aluminum shell, 2 sealed cartridge bearings - International Standard 6-bolt disc rotor mount - Includes endcaps to switch for 9x100mm QR, 15x100 thru-axle and 20x110mm thru-axle
Sturmey-Archer Track Hubs
$46.16
- Use a front/reat set or match the front with Sturmey 3sp fixed rear or 2sp kickback rear - 6061 aluminum shell with sealed cartridge bearing and solid nutted axle (145mm front/175mm rear overall axle length) - Rear is flip-flop threaded for freewheel
Page 1 of 3 Next page