Wheels

Did you trash the front bearings on your WeThePeople Arrow front hub? It happens, that just means you're riding a lot. Fear not, we've got you covered with this bearing set from WeThePeople.

The Shimano HB-RS470 front disc brake hub features a Center Lock design, Internal Grease Sleeve, and Cup and Cone Bearing technology. - The Center Lock system makes for easy rotor installation with a quick and secure spline mount and lock ring - Hub features internal o-rings and a grease sleeve that helps maintain grease levels and increases service life

Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.

After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option. Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes. - Lightning is Better—Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile, and lighter weight option to replace your stock thru-axles. - Low Profile—No more bulky handles to strike trail obstacles or create wind drag. Aerodynamic design. - Light Weight—Our axles are internally bored to remove unnecessary material without compromising strength. - Easy to install—Our matching front and rear Lightning Bolt-On Axles require only a standard 6mm hex wrench for easy installation and removal. - Better Tolerances—Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. No longer will your axle loosen while riding. - The axle is precision CNC-machined in the USA from 7075 aluminum and hard-anodized for rugged durability. Our axles are built to the tightest standards in the industry. - No special tools required. Design allows for wheel installation and removal using your standard 6mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.

The Rampage rear wheel features a sealed bearing hub, 14mm axle and a Rampage double-walled rim. - Includes Stolen PVC rim strip - Brake Compatibility: Rim Brake - Wheel Size: 20" - ISO Diameter: 406 / 20" BMX - Valve: Schrader - Tire Type: Clincher - Axle: 3/8" chromoly (Heat-treated) - Hardware: Steel (17mm wheel nuts) - Hub Shell Bearings: 6000 (x2) Verify bearing number on side of rubber seal - Spokes: 187mm (3X) Black w/ Black Brass nipples - Drilling: 36h only - Weight: 32.5 oz

Featuring WTP's very own, patented 3-point clutch friction system, the Helix hub will take you backwards in style and hold up to any peg abuse that comes its way. - Unique internal arrangement with face-bearing clutch stopper - WTP Patented "Tri-Point" friction system - Hub Drilling: 32 - Cassette Body Type: Single Cog Driver - Axle Size: 14mm - Spoke Interface: J-Bend

ENVE AM30 Carbon Wheelsets use a 30mm inside width rim that is tuned for compliance and damping for performance on All-Mountain, Enduro, and Trail riders. - 30mm internal rim width - Gravity rated impact strength - Rim shape tuned for compliance and damping - Wide Hookless Bead Anti-pinch flat technology

ENVE AM30 Carbon Wheelsets use a 30mm inside width rim that is tuned for compliance and damping for performance on All-Mountain, Enduro, and Trail riders. - 30mm internal rim width - Gravity rated impact strength - Rim shape tuned for compliance and damping - Wide Hookless Bead Anti-pinch flat technology

CZR i30 wheels were designed to handle it all, which is why they feature a strategically reinforced carbon layup and are hand built using double-butted spokes, brass nipples and high-engagement hubs featuring top-tier bearings and oversized freehub seals to establish themselves as wheels that simply won't quit. Solid Strip & TCS Tape - Durable nylon strip that lies between the rim and tubeless tape to prevent tubeless tape from pushing into the spoke holes and ensures a smooth interface between the tire and rim. The smooth surface makes it easier to mount a tire by preventing air from escaping around the bead at each indent during inflation. Solid Strip also protects the airtight system from puncture in the case of a broken spoke. 3-Cross Lacing & Brass Nipples - Too many companies are trying to save weight by offering "enduro" wheels with 2-cross lacing patterns and inadequate alloy nipples. While those are suitable for XC and light trail usage, there's no replacement for the long-term reliability of a 3-cross lacing pattern with brass nipples holding it all together. Frequency Hub - The world's best carbon rims deserved to be paired with high-quality hubs that further improve the performance of a lightweight, dependable carbon wheelset. Frequency hubs feature a low-drag, 6-pawl design that alternates contact between two sets of 3-pawl groupings to provide a responsive 5 degrees of freehub engagement. Heavy-Duty Pawl Springs - CZR i30 wheels feature heavy-duty pawl springs that engage with greater force to counteract the additional torque caused by sudden cranking on steep trails. We also offer a Light Pawl-Spring Kit that can be purchased separately for CZR i30 riders who prefer a quieter hub with lighter pawl engagement. Usage: Trail, Enduro

Replacement freehub bodies for Easton M1 hubs. - Material: Aluminum - Cassette Body Type: Shimano HG10

The design of the rim enables maximum aerodynamic penetration, and at certain angles, the wind can actually become a valuable ally to the rider. Aerodynamic hubs and ceramic USB cup-and-cone bearing system in the hubs themselves: every design choice has been made with a view to optimizing performance. - USB cup-and-cone bearing system guarantees smoothness in the ceramic bearings - The 2-Way Fit profile allows you to mount either a clincher or a tubeless tire - 19mm inner width enables you to mount 23, 25 and 28mm tires Specifications: - Hub/Brake Compatibility: Rim Brake - ISO Diameter: 622 / road / 29" - Tire Type: Tubeless Ready Clincher

HED's entire line of Big Deal fat rims can now be purchased as a rim-only for the custom build of your dreams. Our demanding, discerning, and fat-loving customers have spoken: They love our Big Deal carbon rims. Nothing else offers the same combination of easy tubeless setup, stiffness, and jaw-dropping weight savings. They're utterly fat-tastic. In an effort to bring the advantages of Big Deal technology to an even wider audience, our engineers worked hard to apply the same principles to an aluminum platform. Enter: the Big Aluminum Deal and Big Half Aluminum Deal. At 80mm wide, these rims offer superb fit with all common fat bike tire sizes. They have the same patented Inflatobam tubeless technology as their carbon brethren - saving over a pound in inner tubes alone. What's the difference between the B.A.D. and the B.H.A.D.? Only the rim diameter. The B.A.D. has a 26" diameter, while the B.H.A.D. is made for larger 27.5" fat bike tires. Additional Info - Rim Type: Tubeless-Ready Clincher - Rim Width: 80mm - Rim Material: 6061 Aluminum - Rim Weight: 695g - Color: Black - Rim Hole Count: 32 - MIN/MAX TIRE SIZE: 3.8 - 5.0" - Drill Pattern: Symmetrical Only - Decal Type: Shadow - Rim ERD: 586 (27.5"), 562mm (26"), 510mm (24")

R45D hubs combine a lightweight hub body, our legendary made-in-house bearings, and a six-bolt rotor mount to harness the power of disc brakes. The result is the increased power and modulation of disc brakes, the fast, smooth rolling speed of our bearings, and the rail steering from our one-piece solid axles. Our bearings, available in steel and ceramic, have heat-treated, surgical-grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use. - Engineered, manufactured, and assembled in Portland, Oregon USA - 5-year built-to-last warranty - Legendary made-in-house bearings - Easily serviceable and completely re-buildable with our R45 Hub Service Tool - Available in 9 beautifully anodized colors - Ceramic bearing upgrade available

This wheel matches original equipment for Surly Long Haul Trucker.

Best seller. You'll be hard-pressed to find a better wheel anywhere near these prices. - Cartridge bearing hub with solid axle

Built for bashing, whether on a gravity shred sled or fully loaded bikepacking rig, WTB's KOM Tough rims are extruded from top-tier alloy to provide utmost durability at a reasonable weight. Their legendary I-Beam construction has evolved to further reinforce the rim with dual support beams that provide increased strength and stiffness for the world’s most aggressive riders. KOM Tough rims are proven on the toughest tracks of the Enduro World Series, depended on for daily trail rides, and trusted while bikepacking in remote regions of the world. Features: - TCS 2.0 creates a more robust, easily installed and dependable tubeless system. - A recessed channel along the center of TCS 2.0 rims allows installation of the all-new Solid Strip, which prevents tubeless tape from sagging at the spoke holes and results in a smooth, consistent interface between the tire and rim. - 4D angled spoke drilling eliminates binding and lateral loading, and disperses tension more evenly over a greater area.

Stiffer, stronger, and ready to party, ARC 31 Carbon Rims take notes from Race Face's Next R carbon wheelset; built to handle the most challenging days on the trail. With one of the lightest enduro rims on the market, you can tackle the climbs with speed while you hit the descents with confidence. The ARC 31 has been redesigned to take full advantage of the benefits carbon fiber has to offer, and feature a generous 31mm internal width for modern tire widths with lower pressures. Lace these rims to your favorite hub, and you’ve got a world-class wheelset ready for action.

At the Center of It All Cast your eyes upon your new favorite component, the infinitely adaptable, fully tuned-and-dialed hub of choice for your custom wheel build. The Vault has almost instant power transfer for slippery-fast speed by way of solid, smart design. Power To The Pedal Let's add it up: a 60-tooth drive ring, 6 pawls, acting in 2 groups of 3, for 120 points of engagement. The result– almost instant transfer of power. Overbuilt But Not Overkill With this hub, bigger is better. An oversized hub shell ads stiffness and stability while large and in-charge 6902 bearings perform for the long run.

- Braking surface: Disc - Rim weight: 445g - Finish: Black Anodize/Vinyl Decals - Type: Tubeless-ready clincher - Rim material: EA90 aluminum/welded - Rim depth: 27mm - Internal rim width: 19.5mm - External rim width: 24mm - Spoke holes: 28; 32 - ERD: 580 - Max tension: 1200 N/122 KGF

Find the road less travelled on the new EA70 AX. Joining forces with the EA70 and EC70 AX Bar in our AX adventure road line, the new EA70 AX wheel has the durability to withstand trail riding but is translated to drop bar applications with center lock hubs and 11-speed road compatibility. From bikepacking adventures loaded with gear, to washboarded gravel descents with only your wheels and tires providing the compliance, we have you covered. The welded tubeless ready rim boasts a generous 24mm internal rim width that increased tire volume and gives an optimal tire profile for 35 to 50C tires. It’s the perfect wheel to round out any adventure drop bar build.

Replacement freehub spoke protector, in various sizes for different freehub sizes. - Made of clear plastic - 3 hooks for affixing to spokes

Replacement freewheel spoke protector, in various sizes for different freehub sizes. - Made of clear plastic - Fits around standard freewheel threads

Get your WeThePeople Arrow Front Hub Axle/Cone Set and freshen up that front end that's a little wobbly after that last time you cased it on the spine.

Did you trash the bearings on your WTP Supreme rear hub? It's okay, that just means you're going big enough to make it count. Fear not, we've got you covered with this bearing set from WeThePeople.

WeThePeople spokes are high-quality, high-strength and black as night. Lace your wheels up right with these spokes, and land big airs to flat with confidence. - Front- and Rear-specific lengths - For use with WTP Supreme hubs and 22-inch Logic rim - Replaces spokes used in wheels on 2018 Audio complete bike - Includes 16mm brass nipples

A few too many drops to flat? Get your Arrow Rear Hub back in solid working order with this replacement axle/cone set from WeThePeople.

Wheels are the first point of contact between you and your bike, and the trail you’re riding on. And while wheel sizes and standards continue to develop significantly year on year, often to both the rider and the industry’s dismay, very little innovation has been seen in the compliancy and responsiveness of the wheel as this first, most important contact and conductor. What Spank has seen in recent years is that bike suspension is continuously evolving and adapting to compensate for stiffer frames and more rigid, deeper profile carbon fiber rims. This overall stiffer rig is being softened, or counter-acted by both bike suspension, and tire design — not to mention the ever lower and lower tire pressures riders are running. Rider position (wider, lower, more forward) is also being impacted directly by the bike frame and cockpit geometries which is constantly aiming for a better riding feel. So surely it is overdue time to re-examine how the engineering of the wheel can become an active contributor to the efficiency of the overall set up. Spank Industries has done just this. - Low sectional profile height and wide width, adds radial compliance, while keeping high lateral stiffness. - 30mm internal width extremely versatile, fitting tires from 2.0” to 2.6” perfectly, and even allowing + size tire use, without negative squaring off of tire profiles. - Ideal for Trail/AM/Enduro bikes looking for a wide profile, without the weight penalty

What It Is The definitive mountain wheel. The M6 Series defines the modern and varied interpretation of the mountain bike. Loaded with traction and acceleration on the climb, it's also backed with precision and control while absorbing vibrations and impacts on the descent. The M6 Series is designed in two diameters and three widths to ensure your sophisticated preference for tire size and pressure is met with an uncompromising tire-to-rim interface. Who It's For The mountain biker who wonders what is possible, the skeptic afraid of "plastic" wheels, the weight weenie, the Clydesdale, the high-mileage guy, the weekend warrior. It would be easier to describe who it is not for… Why We Made It ENVE showed the world that a mountain bike wheel could be carbon — we're still immensely proud of that achievement. A mountain bike wheel, however, can be so much more. The M6 Series is not about technical challenges, and we refuse to chase specifications in order to be the widest, tallest, or stiffest. For the M6 Series of wheels, the question was not about carbon, rather, "What is the potential of a mountain bike wheel?" Each M6 Series wheel model is designed for the broad range of tire widths, hub configurations, and sizes so that you, the modern trail rider, can choose between them.

These bobbins are made by the Robert Axle Project and are identical to the bobbins that came with your original BOB skewer. Slide them on your axle ends to complete your Robert Axle thru axle for BOB Trailer. - Sold in pairs - Manufactured from 303 Stainless Steel - Includes stainless steel hardware for attaching to axle

E-bikes add to the riding experience by simply providing more for less. More distance, more laps, more climbs and more descents. With all those "mores" also comes more weight continually bashing on the components of an e-bike. In order to overcome the increased forces induced by the technological progression of modern e-bikes, we designed our HTZ rims with more material in every area of the rim prole. Every wall of the rim is 25-30% thicker in comparison to those on our standard rims, which we then paired with our proven I-Beam center support to ensure no beating was too great for these rims. All HTZ rims are TCS 2.0 tubeless, feature asymmetrical spoke drilling, and are available in widths ranging from i23 to i35 in order to provide options for e-bikes ranging from e-assist gravel bikes to dual-crown downhill bikes that no longer need a truck to be shuttled. FEATURES: - Capable of withstanding the forces of a modern e-bike. - 4D angled spoke drilling eliminates binding and lateral loading and disperses tension more evenly over a greater area. - Symmetric outer profile provides equal dissipation of impact forces on both sides of the rim while asymmetric spoke hole drilling allows for more even spoke tension and increased wheel strength. - Disc-brake only. - TCS 2.0 Tubeless ready and comes with a preinstalled Solid Strip, which lies beneath the tubeless tape and prevents sagging at the spoke holes, creating a smooth interface between the rim and tire bead. This prevents air from escaping around the bead and therefore requires less air volume and pressure to mount a tire. Solid Strip also protects the airtight tubeless system from being punctured in the case of a broken spoke. TCS 2.0 creates a more robust, easily installed, and dependable tubeless system. USAGE: E-bike

The ENVE 65 is a modern speed specialist in every way. Triathletes and road racers seeking PRs in their objectives against the clock will find their efforts rewarded by the ENVE 65. - Application: Road Race, Triathlon, Time-Trial - Internal Rim Width: 21mm - Compatible Tire Size: Tubeless 25c or larger - Wheelset Weight: 1641g - Real World Foundation Aero Technology - Wide Hookless Bead provides pot-hole protection - Tubeless Optimized for Rolling Fast and Fewer Flats - Lifetime Incident Protection and 5 Year Factory Warranty - Handmade in Ogden, Utah

The Spank 359 Rim is a radially compliant gravity rim featuring our Oohbah Inverted Inner Wall and BeadBite anti-burp technology. Optimized for DH, FR, and heavy enduro use. - Moderately low 19mm profile height and wide width balances the benefits of radial compliance with high lateral stiffness and predictable handling. - Radial Compliance improves traction over bumps and chatter while reducing negative feedback to the rider. Performance and comfort are improved. - 5mm inner width is extremely versatile, fitting tires from 2.0" to 2.6", and even allowing + size tire use without negative squaring off of tire profiles. - Bead Bite tubeless hooks enhance tubeless performance and tire security, even at lower pressures.

The Rampage rear wheel rolls on a four-bearing sealed freecoaster hub with 14mm chromoly axle. It's hand-laced to a 36-hole Rampage double-wall rim, and features a 9T chromoly driver with 3-pawl system. - Axle: 14mm chromoly (heat-treated) - Driver: 1-pc chromoly RHD or LHD - Hardware: Steel(17mm wheel nuts) - Hub shell bearings: 6002 (x1) & 7902 (x1) verify bearing number on side of rubber seal - Drilling: 36H - Weight: 46.4-ounces

The Rampage rear wheel rolls on a four-bearing sealed cassette hub with 14mm chromoly axle. It's hand-laced to a 36-hole Rampage double-wall rim, and features a 9T chromoly driver with 3-pawl system. - Axle: 14mm chromoly (heat-treated) - Driver: 1-pc chromoly RHD or LHD - Driver bearings: 6802 (x2), verify bearing number on side of rubber seal - Driver pawls: 3 Pawl - Driver spring: Wraparound (x1) - Hardware: Steel (17mm wheel nuts) - Hub shell bearings: 6902 (x2) verify bearing number on side of rubber seal - Drilling: 36H - Weight: 45.4-ounces

The Rampage rear wheel rolls on a four-bearing sealed cassette hub with 14mm chromoly axle. It's hand-laced to a 36-hole Rampage double-wall rim, and features a 9T chromoly driver with 3-pawl system. - Axle: 14mm chromoly - Driver: 1-pc chromoly RHD, 9T - Driver Bearings: 6802 (x2), verify bearing number on side of rubber seal - Driver Pawls: 3 Pawl - Driver Spring: Wraparound (x1) - Hardware: Steel (17mm wheel nuts) - Hub Shell Bearings: 6902 (x2) verify bearing number on side of rubber seal - Drilling: 36H

E-bikes add to the riding experience by simply providing more for less. More distance, more laps, more climbs, and more descents. With all those "mores" also comes more weight continually bashing on the components of an e-bike. In order to overcome the increased forces induced by the technological progression of modern e-bikes, we designed our HTZ rims with more material in every area of the rim prole. Every wall of the rim is 25-30% thicker in comparison to those on our standard rims, which we then paired with our proven I-Beam center support to ensure no beating was too great for these rims. All HTZ rims are TCS 2.0 tubeless, feature asymmetrical spoke drilling, and are available in widths ranging from i23 to i35 in order to provide options for e-bikes ranging from e-assist gravel bikes to dual-crown downhill bikes that no longer need a truck to be shuttled. FEATURES: - Capable of withstanding the forces of a modern e-bike. - 4D angled spoke drilling eliminates binding and lateral loading and disperses tension more evenly over a greater area. - Symmetric outer profile provides equal dissipation of impact forces on both sides of the rim while asymmetric spoke hole drilling allows for more even spoke tension and increased wheel strength. - Disc-brake only. - TCS 2.0 Tubeless ready and comes with a preinstalled Solid Strip, which lies beneath the tubeless tape and prevents sagging at the spoke holes, creating a smooth interface between the rim and tire bead. This prevents air from escaping around the bead and therefore requires less air volume and pressure to mount a tire. Solid Strip also protects the airtight tubeless system from being punctured in the case of a broken spoke. TCS 2.0 creates a more robust, easily installed, and dependable tubeless system. USAGE: E-bike

Seal kit to keep water and dirt out of your Race Face Vault hubs.

V2 Tubeless valves are stronger, lighter, and even easier to use thanks to the machined aircraft grade 7075 aluminum and Muc-Off's new Tire Insert air ?ow system. The new design features six slots that are machined into the base of the valve stem, allows tubeless sealant ?uid and air to ?ow freely, even when running tubeless tire inserts. - 7075 Machined Aluminum valve stem and cap - Tire Insert air flow system keep air moving freely and compatible with most tire foam inserts - 4mm machined Allen Key slot for easy installation and removal - Includes Valve Core Removal Tool (integrated into spare alloy cap) - Supplied with various rubber bases to optimize fit with multiple rim types

- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires - E-sync hubs Specs: - Hub Model: E-SYNC - Freehub Body: Shimano HG - Wheel Tire Type: Tubeless Ready - Wheel-Brake Comp.: Disc IS 6-bolt - Rim Material: Aluminum - Spoke Type: Sapim D-Light - Valve: Presta - Rim Construction: Double wall

- Hub axle end cap set, rear - Zipp Cognition V2 Disc Brake - Rim brake compatible with XDR & 11-speed

- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 25mm width optimized for 40mm Gravel tires and up to 2.3" mountain tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed

- Asymmetric Bead Socket Technology brings Stan's legendary easy inflation and the most reliable airtight seal to wider, offset carbon rims - Custom carbon layup equalizes impact forces on both the long and short sides of the rim, making both stronger - Asymmetric rim shape with offset drilling improves bracing angle and balances spoke tension to create a stronger overall wheel - M-pulse hubs - 250lb Recommended Maximum Rider Weight

Zipp's 101 XPLR is a purpose-built wheel for gravel. Thanks to MOTO Technology, this wheel arms gravel cyclists with more control and durability over harsh terrain, providing a smooth ride quality that helps reduce fatigue. That means a more comfortable ride. The 101 XPLR—short for explore—is purpose-built for riders searching for adventure beyond the norm. Think of it as a magic carpet ride over primitive roads, especially with large tubeless tires at lower tire pressures. This wheel is ideal for gravel racing, adventure, or any long day in the saddle. Based on Zipp's MOTO Technology, the 101 XPRL's single-wall rim construction provides excellent compliance and vibration damping. Less fatigue, allows you to ride longer and faster. The 101 XPLR features the ZR1 hubset for better seal design for improved durability and quicker response with 66 points of engagement. With 101 XPLR, victory is in the pursuit of adventure. - All-day comfort and compliant ride - Available in 700c or 650b - 27mm wide internal profile - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Less fatigue, which allows you to ride longer and faster - Frustration-free tire installation - ZR1 hubset for better seal design for improved durability and quicker response with 66 points of engagement - Lifetime Warranty

Zipp's 101 XPLR is our first purpose-built rim for gravel. Thanks to MOTO Technology, this wheelset arms gravel cyclists with more control and durability over harsh terrain, providing a smooth ride quality that helps reduce fatigue. That means a more comfortable ride. The 101 XPLR -short for explore-is purpose-built for riders searching for adventure beyond the norm. Think of it as a magic carpet ride over primitive roads, especially with large tubeless tires at lower tire pressures. This rim is ideal for gravel racing, adventure, or any long day in the saddle. Based on Zipp's MOTO Technology, the 101 XPRL's single-wall rim construction provides excellent compliance and vibration damping. Less fatigue, allows you to ride longer and faster. Quarq's TireWiz is an add-on option for 101 XPRL to dial in your pressure for an even more compliant ride. - All day comfort and compliant ride - Available in 700c or 650b - 27mm wide internal profile - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Less fatigue, which allows you to ride longer and faster - Frustration-free tire installation - Lifetime Warranty

- STW ST1 26.5mm wide alloy rims - KT QR ATB 9mm/100/108 axle - Black or Silver UCP spokes

Wheel Freehub Kit—XD Driver Body Kit—Zipp ZM2 - Compatible With: WH-MOTO-30-B1

WHY WE MAKE THIS It's our job to make the best riding hubs in the industry, and 142mm x 12mm rear hubs are THE standard for road disc and gravel bikes, so we poured our hearts and souls, not to mention an awful lot of engineering, into this hub. We think it's the best all-around disc hub on the market. WHY YOU WANT IT R45 Centerlock™ hubs combine a lightweight hub body, our legendary made-in-house bearings, and Centerlock compatibility. The result rolls better, lasts longer, sounds cooler, and looks way more handsome than anything else out there. On top of all that, the 45 points of simultaneous engagement in this hub improve power transfer and traction thanks to our patented RingDrive™ system. Our bearings, both steel and ceramic, have heat-treated, surgical-grade steel races that are machined simultaneously to ensure perfect matching. The quality and speed of our bearings are what you will feel (and hear) on every ride. As Chris King bearing tracks burnish they get actually get faster. A little bit of regular love (i.e. service) will keep this hub rolling for years upon years of demanding use. All Chris King rear hubs come with that signature, angry-bee sound. - Engineered, manufactured, and assembled in Portland, Oregon USA - Legendary made-in-house bearings · King Lifetime Warranty - Patented RingDrive™ system with 45 simultaneously engaged points of contact for virtually drag-free engagement - Available with Shiamano/Sram HG or Sram XDR drive shell - 142mm x 12mm thru axle rear - Easily serviceable and completely re-buildable with our R45 Hub Service Tool - Ceramic bearing upgrade available - Available in 24h, 28h, and 32h - Lockring is sold separately (PHB355) and is required for rotor installation on rear hub HUB SPECIFICATIONS: - Axle Width: 142mm - Flange Diameter DS & NDS: 57.4mm - Center to Flange DS: 18.7mm - Center to Flange NDS: 33mm

Hub Adapters for all Oozy hubs and 2016 Spike hubs.

CX-Ray 298mm Straight pull spokes fit every position of the Rise 60 (B1), 29" wheel. - Length: 298mm - Spoke Interface: Straight Pull

281mm Bladed Straight-Pull External Black Roam 50 27.5 Wheels, 3-pack

Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Shimano / Japanese rear hubs with 126mm spacing - Type: Hollow Axle - Threads: 10mm x 1 - Diameter: 10mm - Length: 137mm - 1 axle per bag

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Rear 10mm x 1 axle - Shimano Rear Right Cone - Threads: 10mm x 1 - Diameter: 16.9mm - Length: 12.5mm - Cone Wrench Size: 15mm - 1 cone per bag COMPATIBLE HUBS: - Sora FH-3300, 9-spd Rear

When you can’t even see a part, you might forget about it, but it doesn’t mean its not important. Flat tires are probably the most common bicycle failures. Many times, flats are caused by the rims, specifically the lack of protection from the rims' sharp edges. Good rim strips didn’t exist for BMX rims. They work well and improve the function of any 20 inch rim. If you forget about them, that means they are doing their job.

Shimano's Alfine SG-S7001 Disc Brake Internally Geared Hub delivers an impressive gear range, spread across 11 speeds, all with the reliability and low maintenance you can only get with an internally geared hub. - Center Lock Disc Rotor Compatible

Wheels Manufacturing Axle Spacers help you dial in your hub spacing to ensure correct fit and side-to-side spacing in the rear triangle without having to alter the wheel's dish. - Spacers come in bags of 20

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: JoyTech, Joy U, KK 9mm x 1, front hub - Compatible with 9mm x 1 axle - Cone Wrench Size: 15mm - Threads: 9mm x 1 - Diameter: 15.0mm - Length: 12.8mm - 1 cone per bag - Note: O-ring / seal not included. COMPATIBLE HUBS: - JoyTech, Joy U, KK 9mm x 1, front hub - Taiwanese front hubs with 9mm x 1 axle

- Colored rim decal kits to personalize your ride - Decals to fit 2 100w 26-inch rims

- Colored rim decal kits to personalize your ride - Decals to fit two (2) 70w 26-inch rims

No.9 36w rims are our choice for all-around trail riding and off-road touring. They fit a huge range of modern mountain bike tires and offer lightweight performance across the board. Available in both 27.5" and 29" sizes, these highly versatile mountain rims provide huge performance gains over aluminum rims of the same width. A perfect mix of width, weight, and stiffness, these will be right at home on almost any mountain bike in your stable. As with all rims we sell, these come with tubeless valves and tape in the box. - Designed to be used with spoke nipple washers - Recommended weight limit 240lbs

No.9 36w rims are our choice for all-around trail riding and off-road touring. They fit a huge range of modern mountain bike tires and offer lightweight performance across the board. Available in both 27.5" and 29" sizes, these highly versatile mountain rims provide huge performance gains over aluminum rims of the same width. A perfect mix of width, weight, and stiffness, these will be right at home on almost any mountain bike in your stable. As with all rims we sell, these come with tubeless valves and tape in the box. - Designed to be used with spoke nipple washers - Recommended weight limit 240lbs